Threshold Setup - BridgeTech VB20 User Manual

It is also possible to add new frequencies manually by copying existing tuning list
entries using the Duplicate highlighted button.

6.16.3 Threshold setup

The redundancy threshold have to be set in the same list as the ETR thresholds, where
the option is located next to every alarm parameter. To set up switching on a ETR
alarm case, both the alarming and the redundancy has to be enabled in the dropdown
list and checkbox. Each interface may have their own thresholds set in the
corresponding tuning setup.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
216