BridgeTech VB20 User Manual page 151

CA system checks: Enable or disable alarming of Conditional Access
CA system checks -
Maximum ECM interval
CA system checks -
Maximum ECM change
period (ms):
CA system checks -
Minimum avg. EMM bitrate
CA system checks - EMM
bitrate average period (s):
CA system checks -
Maximum control word
period (ms):
PID checks: Enable or disable alarming of PID minimum bitrate,
Service checks: Enable or disable alarming of service minimum
Service checks - Only
allow services listed in
service template:
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
152
ETR Thresholds - Other checks:
System errors.
The maximum allowed ECM repetition interval
Default: 500 ms
(ms):
The maximum time allowed between ECM changes
Default: 25000ms
The minimum allowed average EMM bitrate
Default: 1000 bps
(bps):
The averaging period used to calculate EMM bitrate.
Note that the average period must be at least 20s
less than the round-robin tuning period, e.g. with a
round-robin tuning period of 70s the maximum EMM
bitrate average period is 50s.
Default: 10s
The maximum allowed control word period (the
maximum time that can go by without a change in
the scrambling control bits for scrambled PIDs)
Default: 25 000 ms
maximum bitrate, presence errors and
scrambling/clear required.
bitrate, maximum bitrate, service presence,
scrambling/clear required, service type, service
name and service ID errors. Requirements are
specified in the service threshold template
associated with the stream.
Check this box to enable service ID checks against
the service ID list specified in the service threshold
template associated with the stream.
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv