The Vb260 Qam Demodulator Module(Vb220 Option) - BridgeTech VB20 User Manual

4.7.5 The VB260 QAM Demodulator Module(VB220 Option)

The VB260 DVB-C QAM demodulator is an optional input interface module.
The connectors are:
RF IN: RF input – 75 ohm F-connector
ASI OUTPUT 1: ASI transport stream output – 75 ohm BNC female
ASI OUTPUT 2: ASI transport stream output – 75 ohm BNC females
GPI: Alarm relay output – 9 PIN D-sub male
GPI – Pinout of alarm relay output (to be implemented)
Normal operation
Pins 6-7: Contacts closed
Pins 7-8: No connection
Pin 5: Gnd
An LED indicates whether the demodulator locks to the incoming RF signal or not.
The VB260 module was made end-of-life in 2010 and is now superseeded by the
VB262 dual RF input ITU-T J.83 Annex A/B/C QAM/8VSB module.
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
26
Alarm/Power off
Pins 6-7: No connection
Pins 7-8: Contacts closed
Pin 5: Gnd
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv