BridgeTech VB20 User Manual page 49

Ip-probe vb2-series
Hide thumbs Also See for VB20:
Table of Contents

Advertisement

RX data: The total bitrate of received data traffic
Monitoring
The total bitrate of multicasts and unicasts monitored (analysed) by
:
the probe
IPv4
The IPv4 status as defined in the Setup – Ethernet view
status:
IPv4
The probe IPv4 Ethernet data/video interface IP address as defined by
address:
the user in the Setup – Ethernet view
Ipv4
The probe IPv4 Ethernet data/video interface netmask as defined by
netmask:
the user in the Setup – Ethernet view
IPv6
The IPv6 status as defined in the Setup – Ethernet view
status:
IPv6
The probe IPv6 Ethernet data/video interface IP address as defined by
address:
the user in the Setup – Ethernet view
Ipv6
The probe IPv6 Ethernet data/video interface netmask as defined by
netmask:
the user in the Setup – Ethernet view
Joined: The number of joined streams (multicasts and unicasts)
Unicasts: The number of unicasts currently being joined/monitored by the probe
Multicasts
The number of multicasts currently being joined/monitored by the
:
probe
IGMP ver: The IGMP version currently used by the probe. IGMPv2 is used unless
the operator has selected source specific multicasts (Setup - Params
view), in which case IGMPv3 is used.
VLAN tag: The VLAN tag currently used by the probe. If no VLAN tag has been
specified by the operator (Setup - Params view), the VLAN tag value
will read disabled.
No signal: The number of currently active Ethernet 'No signal' alarms
CC skips: The number of currently active Ethernet 'CC skips' alarms
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
50
Traffic
Data interface
Management interface
ETH info
ETH alarms per type
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb220

Table of Contents