BridgeTech VB20 User Manual page 11

A simplified diagram of the alarm handling mechanisms of the probe is shown in figure
2. The input signals are continuously analysed, and measured data are checked
against user defined threshold values. If the data do not comply with the threshold
values alarms will be generated. The overall alarm settings further make it possible to
enable and disable alarms, thus defining which alarms should be reported in the probe
alarm list and sent as SNMP traps to an external management system.
Figure 2: Simplified Diagram of the Alarm Handling in the probe
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
12