BridgeTech VB20 User Manual page 258

Ip-probe vb2-series
Hide thumbs Also See for VB20:
Table of Contents

Advertisement

The probe hardware can be found from the debug file created when clicking the
Debug data link in the Data view. By viewing line 25 the hardware version is
determined:
---------------------------------DUMP BEGIN
date:
Thu Dec 10 15:41:40 UTC 2009
uptime:
15:41:40 up
1:28, load average: 1.41, 1.29, 1.26
ifconfig:
eth0
Link encap:Ethernet
inet addr:192.168.12.99
UP BROADCAST RUNNING PROMISC MULTICAST
RX packets:67513932 errors:0 dropped:0 overruns:0 frame:0
TX packets:2850 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1476460959 (1408.0 Mb)
Base address:0x4000
eth2
Link encap:Ethernet
inet addr:10.0.200.120
UP BROADCAST RUNNING MULTICAST
RX packets:7346 errors:0 dropped:0 overruns:0 frame:0
TX packets:4568 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:778479 (760.2 Kb)
Base address:0x8400
Base address: 0x8400 means that the hardware version is 1 or 2, and the software
image file named gbprobe_hw1-2... should be used. If the probe software is older
than 4.0 the hardware version is always 1 or 2.
Base address: 0x5000 means that the hardware version is 3 and the software image
file named gbprobe_hw3... should be used.
Step 2: Export and save the probe configuration
Software upgrade should not alter the probe configuration, however for safety is is a
good idea to export the probe configuration (from the Data view) and save it to a file.
Step 3: Delete an existing probe stream recording
If a stream recording is stored on the probe, this may prevent software upgrade, as it
may take up too much space for software image upload to be possible. Therefore
delete the recording prior to software upload - this is done in the RDP view.
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
HWaddr 00:80:82:05:1D:BD
Bcast:192.168.12.255
HWaddr 00:80:82:05:1D:BC
Bcast:10.255.255.255
TX bytes:4267641 (4.0 Mb)
PROBE USERS' MANUAL VERSION 5.0
www.bridgetech.tv
Mask:255.255.255.0
MTU:1500
TX bytes:131100 (128.0 Kb)
Mask:255.255.255.0
MTU:1500
Metric:1
Metric:1
259

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb220

Table of Contents