Oil Pump - Ford Aerostar 1997 Workshop Manual

1997 Aerostar/Ranger
Section 03-01C: Engine, 4.0L V-6
IN-VEHICLE SERVICE

Oil Pump

NOTE: The oil pump (6600) is only serviced as an assembly. Refer to
and cleaning instructions.
Removal
1. NOTE: On Ranger vehicles it is necessary to remove the engine to remove the oil pan. On
Aerostar vehicles, it is necessary to remove the transmission as outlined in Group 07 to
properly reseal the oil pan.
Remove oil pan (6675) as detailed in this section.
2. Remove oil pump attaching bolts. Lift off oil pump and withdraw oil pump intermediate shaft (6A618).
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C29.HTM~gen~ref.HTM
1997 Aerostar, Ranger Workshop Manual
tomsn048@gmail.com
Page 1 of 3
Section 03-00 for disassembly
2011-04-27