Ford Aerostar 1997 Workshop Manual page 95

1997 Aerostar/Ranger
Installation
Crankshaft rear oil seals used for service applications can come either with or without a metallic crankshaft
sleeve. Special Service Tool T95T-6701-A and T97T-6701-A Rear Crankshaft Seal Replacer, is used for
both applications.
The rear crankshaft seal adapter and two mounting screws attach to the crankshaft. The threaded hole in
the center of the crankshaft seal adapter is used by the rear crankshaft seal replacer to draw down and
locate the crankshaft rear oil seal.
The rear crankshaft seal protector is used for installing seals without a metallic sleeve. It is not used when
installing a rear main oil seal with a sleeve.
CAUTION: Do not remove the metal sleeve from the seal.
CAUTION: This installation procedure requires the use of hand tools only. The use of power
tools or hammering on the installer can damage the sleeve and seal.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C34.HTM~gen~ref.HTM
tomsn048@gmail.com
Page 2 of 6
2011-04-27