1997 Aerostar/Ranger
Section 03-01C: Engine, 4.0L V-6
IN-VEHICLE SERVICE
Crankshaft Pulley/Damper/Front Oil Seal
SPECIAL SERVICE TOOL(S) REQUIRED
Description
Crankshaft Damper Remover T74P-6316-A
Front Cover Aligner
Removal
1. Lift drive belt tensioner (6B209) by rotating it clockwise. Remove drive belt (8620).
2. Remove crankshaft pulley bolt.
3. Remove crankshaft vibration damper and pulley from crankshaft (6303) using Crankshaft Damper
Remover T74P-6316-A.
4. Pry crankshaft front seal (6700) from engine front cover (6019) with a flat-bladed screwdriver or other
similar tool. Use care to prevent damage to engine front cover and crankshaft.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C20.HTM~gen~ref.HTM
Tool Number
T74P-6019-A
tomsn048@gmail.com
1997 Aerostar, Ranger Workshop Manual
Page 1 of 3
2011-04-27