Ford Aerostar 1997 Workshop Manual page 188

1997 Aerostar/Ranger
Section 03-01C: Engine, 4.0L V-6
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Pistons, Piston Pins and Rings
Disassembly
1. Remove connecting rod bearings (6211) from connecting rod and cap.
2. Remove piston rings using a suitable piston ring expander.
3. Mark connecting rod cap to make sure of assembly with the same piston (6108) and installation in the
same cylinders from which they were removed.
4. Using an arbor press and Piston Pin Removal and Replacer D81L-6135-A or equivalent, press the
piston pin (6135) from the piston and connecting rod (6200).
Item Part Number
1 —
2 6135
3 —
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C47.HTM~gen~ref.HTM
1997 Aerostar, Ranger Workshop Manual
Description
Press Ram
(Part of D81L-6135-A)
Piston Pin
Receiving Tube
(Part of D81L-6135-A)
tomsn048@gmail.com
Page 1 of 5
2011-04-27