Ford Explorer 1997 Owner's Manual
  1. Manuals
  2. Brands
  3. Ford Manuals
  4. Automobile
  5. 1997 Explorer
  6. Owner's manual

Ford Explorer 1997 Owner's Manual

Ford explorer 1997
Hide thumbs Also See for Explorer 1997:
Table of Contents

Advertisement

Quick Links

www.carburetor-manual.com
Would you like some Free Manuals?
http://carburetor-manual.com/free-shop-manual-club-t-13.html
Also visit
http://freeshopmanual.com
for more Free Manuals
Also Visit my website for 7 FREE Download Manuals starting
with this one.
"The ABC's of Carburetion"
Click Here Now
file:///C|/Documents%20and%20Settings/Tim/Desktop/carburetor-manual-welcome/index.htm[4/25/2009 11:42:20 AM]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Explorer 1997 and is the answer not in the manual?

Questions and answers

Related Manuals for Ford Explorer 1997

Summary of Contents for Ford Explorer 1997

  • Page 1 www.carburetor-manual.com Would you like some Free Manuals? http://carburetor-manual.com/free-shop-manual-club-t-13.html Also visit http://freeshopmanual.com for more Free Manuals Also Visit my website for 7 FREE Download Manuals starting with this one. "The ABC's of Carburetion" Click Here Now file:///C|/Documents%20and%20Settings/Tim/Desktop/carburetor-manual-welcome/index.htm[4/25/2009 11:42:20 AM]...

  • Page 2: Table Of Contents

    Contents Before driving Introduction Instrumentation Controls and features Seating and safety restraints Starting and driving Starting Driving Roadside emergencies Servicing Maintenance and care Capacities and specifications Reporting safety defects Index...

  • Page 3: Introduction

    Introduction ICONS Indicates a warning. Read the following section on Warnings for a full explanation of them. Indicates that vehicle information related to recycling and other environmental concerns will follow. We must all play our part in protecting the environment. Correct vehicle usage and the authorized disposal of waste cleaning and lubrication materials...
  • Page 4 INFORMATION ABOUT THIS GUIDE The information found in this guide was in effect at the time of printing. Ford may change the contents without notice and without incurring obligation. SPECIAL NOTICES Notice to owners of utility type vehicles Before you drive your vehicle, please read this owner’s guide...
  • Page 5 Introduction Using your vehicle as a snowplow Do not use this vehicle for snowplowing.

  • Page 6: Instrumentation

    Instrumentation Speed Tachometer control (pg. 15) (pg. 40) 50 60 70 o o o UNLEADED FUEL ONLY 0 0 0 0 0 0 COAST Headlamp control (pg. 25) Tilt steering wheel lever Driver air bag (pg. 44) Instrument panel (pg. 89) dimmer switch Turn signal and (pg.
  • Page 7 Instrumentation Electronic sound Gearshift (includes system; refer to overdrive button) Audio Guide (pg. 36) (pg. 121) Rear wiper/washer control (pg. 37) VOL – PUSH ON FM 1 BAL FADE FM BASS TREB AUTO PUSH SEEK TAPE CD SCAN DOLBY SYSTEM TUNE DISCS COMP...
  • Page 8 Instrumentation INSTRUMENT CLUSTER LIGHTS AND CHIMES 60 70 0 0 0 SPEED 0 0 0 0 0 0 CHECK CONTROL ENGINE DOOR km/h AJAR RPMx1000 BRAKE R N D 2 1 THEFT Speed control (if equipped) Illuminates when either the SET SPEED ACC or RSM switches are pressed CONT...
  • Page 9 Instrumentation Check engine Illuminates when the engine’s Emission Control System requires CHECK service. It will also illuminate when ENGINE the ignition key is in the On position and the engine is Off. Anti-theft system (if equipped) Illuminates when the anti-theft system is arming and flashes when THEFT the anti-theft system is armed.
  • Page 10 Instrumentation Door ajar Illuminates when the ignition switch is in the ON or START DOOR position and any door or the AJAR liftgate is open. Check gage Illuminates when the key is in the ON position and the engine coolant CHECK temperature gauge, the engine oil GAGE...
  • Page 11 Instrumentation Safety belt Illuminates when the ignition is switched on to remind you to fasten your safety belts. For more information, refer to Using the safety restraints properly in the Seating and safety restraints chapter. Brake system warning Extinguishes when the parking brake is released.
  • Page 12 Instrumentation is not in the ignition) and the driver’s door is opened. Key-in-ignition warning chime Sounds when the key is left in the ignition in the Off/Lock or Acc position and the driver’s door is opened. Safety belt warning chime For information on the safety belt warning chime, refer to the Seating and safety restraints...
  • Page 13 Instrumentation INSTRUMENT CLUSTER GAUGES 50 60 70 o o o 0 0 0 0 0 0 km/h RPM x 1000 Engine coolant temperature gauge Indicates the temperature of the engine coolant. At normal operating temperature, the needle remains within the “NORM” area. If it enters the red section, the engine is overheating.

  • Page 14: Trip Odometer

    Instrumentation and have your vehicle checked at your dealership or by a qualified technician. Speedometer Indicates the current vehicle speed. 50 60 70 o o o 0 0 0 0 0 0 km/h Odometer Registers the total mileage of the vehicle.
  • Page 15 Instrumentation Tachometer Indicates the engine speed in revolutions per minute. RPM x 1000 Charging system gauge This gauge shows the battery voltage when the ignition key is in the ON position. If the pointer moves and stays outside of the normal range, have the vehicle’s electrical system checked as soon as safely possible.
  • Page 16 Instrumentation MESSAGE CENTER (IF EQUIPPED) With the ignition in the ON position, the message center displays important vehicle information through a constant monitor of vehicle systems. You may select display features on the message center for a display of FUEL status preceded by a brief indicator chime.
  • Page 17 Instrumentation Fuel range Press once to display the approximate kilometers (miles) left to drive before the fuel tank is empty. FUEL Press again to display the distance driven since fuel was last added to the tank. For maximum accuracy of this display feature, the ignition should be in the Off position during fueling.
  • Page 18 Instrumentation Fuel economy Press once to display your vehicle’s average fuel economy in kilometers/liters (miles/gallons). Press again to display the fuel FUEL economy that your vehicle is getting at that particular time. Your vehicle must be moving in order for this display to function properly.
  • Page 19 Instrumentation • automatic ride control (if equipped) • fuel level The engine oil life left has two phases. The first display will indicate the oil change status (OK, SOON, REQUIRED). The second display will indicate the percentage of oil life remaining. The display OIL TEMP SIGNAL ERROR indicates a problem with the system.
  • Page 20 Instrumentation Engine oil life left The engine oil left has two phases. The first display will indicate the percentage the oil change status (OK, SOON, REQUIRED). The FUEL second display will indicate the percentage of oil life remaining. The display OIL TEMP SIGNAL ERROR indicates a problem with the system.

  • Page 21: Controls And Features

    Instrumentation switch Off and have your vehicle serviced as soon as possible. Air ride switch off The air ride suspension switch is off. Refer to Air suspension system in the Controls and features chapter for more information. Change oil soon The engine oil life remaining is 5% or less.
  • Page 22 Instrumentation change to “START OIL LIFE AT XXX%.” 3. Press the OIL CHANGE RESET control until the displayed percentage is the Personalized Oil Reset Percentage you desire. Check charging system The electrical system is not maintaining a proper voltage. Have the electrical system checked as soon as safely possible.
  • Page 23 If “CHECK EXTERIOR LAMPS” is displayed, then a low beam headlamp is burned out. If you use additional lights, such as trailer lights, or replace bulbs with equipment that is not equal to the original Ford equipment, you may...
  • Page 24 Instrumentation get a false warning or no warning at all. Door ajar The ignition switch is in the On or Start position and a door is open. Low fuel level The fuel level is low. Low oil level The oil level is low. Refer to Checking and adding engine oil in the Maintenance and carechapter for more information.

  • Page 25: Controls And Features

    Controls and features HEADLAMP CONTROL Rotate the headlamp control to the desired position: OFF — Lamps off Parking lamps, side marker lamps, instrument panel lamps, license plate lamps and tail lamps Headlamps on 50 60 70 o o o 0 0 0 0 0 0 km/h RPM x 1000 R N D 2 1...
  • Page 26 Controls and features Instrument panel dimmer control To adjust the instrument panel dimmer control: • Rotate the control up to brighten the instrument panel lighting. • Rotate the control down to dim the instrument panel lighting. 50 60 70 o o o 0 0 0 0 0 0 km/h RPM x 1000...
  • Page 27 Controls and features The Daytime Running Light (DRL) system will not illuminate the tail lamps and parking lamps. Turn on your headlamps at dusk. Failure to do so may result in a collision. Foglamp control (if equipped) Press the foglamp control to activate the foglamps.
  • Page 28 Controls and features PARKING BRAKE For information on the parking brake, refer to Preparing to start the vehiclein the Driving chapter. BRAKE CLIMATE CONTROL SYSTEM Manual heating and air conditioning system...
  • Page 29 Controls and features Fan speed Turn the control to the right to increase fan speed. Temperature Turn the temperature control to the desired mix of warm and cool air (left for cooler and right for warmer). Controlling airflow Turn the mode control to the desired airflow position.
  • Page 30 Controls and features Using MAX A/C mode The MAX A/C mode recirculates the air and directs it to flow through the instrument panel vents. This mode is noisier, but provides quicker cooling than A/C mode. The compressor only functions if the outside temperature is above 10°C (50°F).
  • Page 31 Controls and features Select A/C for air to flow through these vents: 50 60 70 o o o 0 0 0 0 0 0 km/h RPM x 1000 VOL – PUSH ON FM 1 FM BASS TREB BAL FADE AUTO PUSH SEEK TAPE CD...
  • Page 32 Controls and features windshield defroster vents. The air conditioning compressor will function to dehumidify the windows provided the outside temperature is above 10°C (50°F). Select the for air to flow through these vents: 50 60 70 o o o 0 0 0 0 0 0 RPM x 1000 km/h VOL –...
  • Page 33 Controls and features The EATC feature will maintain a selected temperature and automatically control airflow. You may manually override the EATC operation. The EATC will only operate with the ignition in the On position. To maximize system efficiency: • Do not put items under the front seats that will interfere with the air flow to the rear seats.
  • Page 34 Controls and features Temperature selection For maximum continuous cooling, press the blue portion of the TEMP control until 16°C (60°F) is displayed. For maximum continuous heating, press the red portion of the TEMP control until 32°C (90°F) is MAX A/C VENT PNL•FLR displayed.
  • Page 35 Controls and features Fan speed Once AUTO is selected, fan speed is adjusted automatically for selected temperature conditions. °F AUTO Override automatic fan speed at any time by turning the FAN control up for HI and down for LO fan speeds. To return to automatic fan control, press AUTO.
  • Page 36 Controls and features • OFF — Outside air is shut out and the fan will not operate. • PNL & FLR — Directs air through the instrument panel registers and front floor vent and rear air ducts (if equipped). • FLOOR — Directs airflow through the front floor vent and rear air ducts (if equipped).
  • Page 37 Controls and features Rear window defroster Press the defroster control to clear the rear window of thin ice and fog. 50 60 70 o o o 0 0 0 0 0 0 km/h RPM x 1000 R N D 2 1 VOL –...
  • Page 38 Controls and features Wipers For rear wiper operation, rotate R. WIPE the rear window wiper and washer control to the desired interval position. PUSH 50 60 70 o o o UNLEADED FUEL ONLY 0 0 0 0 0 0 RPM x 1000 km/h R N D 2 1 VOL –...
  • Page 39 Controls and features FUEL PUMP SHUT-OFF SWITCH For information on the fuel pump shut-off switch, refer to Fuel pump shut-off switch in the Roadside emergencies chapter. POSITIONS OF THE IGNITION 1. ACCESSORY allows the electrical accessories such as the radio and wipers/washer to operate while the engine is not running.
  • Page 40 Controls and features 5. START cranks the engine. The key must return to ON when running. SPEED CONTROL (IF EQUIPPED) To turn speed control on Press ON. Vehicle speed cannot be controlled until the vehicle is travelling at or above 48 km/h (30 mph). Do not use the speed control in heavy traffic or on roads that are winding,...
  • Page 41 Controls and features Once speed control is switched off, the previously programmed set speed will be erased. To set a speed Press SET ACC. For speed control to operate, the speed control must be ON and the vehicle speed must be greater than 48 km/h (30 mph).
  • Page 42 Controls and features To set a higher set speed • Press and hold SET ACC. Release the control when the desired vehicle speed is reached • Press and release SET ACC. Each press will increase the set speed by 1.6 km/h (1 mph) or COAST •...
  • Page 43 Controls and features To return to a set speed • Press RSM. For RSM to operate, the vehicle speed must be faster than 48 km/h (30 mph). COAST To disengage speed control • Depress the brake pedal or • Depress the clutch pedal (if equipped) Disengaging the speed control will not erase the previously...
  • Page 44 Controls and features TILT STEERING Pull the lever to adjust the steering column angle. Push the 50 60 70 o o o lever back up to lock the steering UNLEADED FUEL ONLY 0 0 0 0 0 0 RPM x 1000 km/h wheel into position.
  • Page 45 Controls and features FLASH-TO-PASS Pull toward you and release quickly for “flash-to-pass” 50 60 70 o o o UNLEADED FUEL ONLY operation. 0 0 0 0 0 0 km/h RPM x 1000 R N D 2 1 COAST USING OVERDRIVE Overdrive is the normal drive position and will stay on automatically until deactivated.
  • Page 46 Controls and features Deactivating overdrive To deactivate overdrive, press the control at the end of the gearshift lever. The will illuminate. 50 60 70 o o o 0 0 0 0 0 0 Deactivate overdrive when: km/h RPM x 1000 R N D 2 1 •...
  • Page 47 Controls and features Speed dependent wipers (if equipped) This feature operates only in the intermittent wiping mode. In position one (slowest delay) this feature will not function. At higher speeds, the Speed Dependent feature shortens the delay between wipes when you use the variable interval wipers.
  • Page 48 Controls and features • keep the lamps on for up to three minutes after the key is turned to OFF Setting autolamp 1. Make sure that the headlamp control is in the Off position. Leaving the headlamp control on will override the autolamp. 2.
  • Page 49 Controls and features AUTOMATIC DIMMING FEATURE (IF EQUIPPED) The autolamp/automatic dimming mirror is equipped with an automatic dimming feature. This feature will change from the normal state to the non-glare “active” state when bright lights (glare) reach the mirror. When the mirror detects bright light from front or behind, it will adjust automatically to minimize glare.
  • Page 50 Controls and features Adjusting the rearview mirror The inside rearview mirror may adjusted at the two pivot points near the mirror face and the windshield. COMPASS (IF EQUIPPED) Compass display The compass reading may be affected when you drive near large OPEN buildings, bridges, power lines and powerful broadcast antenna.
  • Page 51 Controls and features Compass zone adjustment 1. Determine which magnetic zone you are in by referring to the zone map. 2. Press and hold the MODE control until VAR appears in the display, then release. The display should show the current zone number.
  • Page 52 Controls and features until CAL indicator turns off in about 2–3 complete circles. MESSAGE CENTER (IF EQUIPPED) This feature displays a variety of system display features. Refer to OPEN Message center in the Instrumentation chapter. GARAGE LAMP MODE LAMP Storage compartment (if equipped) Press the OPEN control to open the storage compartment.
  • Page 53 Controls and features variety of aftermarket garage door openers: • Remove the storage clip from the door. • Place Velcro hook onto side of aftermarket transmitter opposite of actuator control. • Place transmitter into storage compartment, control down. • Place the provided height adaptors onto the back of the GARAGE control as needed.
  • Page 54 Controls and features MOON ROOF (IF EQUIPPED) Press and hold the rear portion of the moon roof control to open. Press and hold the front portion of the moon roof control to close. The moon roof has a sliding shade that can be manually opened or closed when the glass panel is LAMP...
  • Page 55 Controls and features 2. Repeat unlock procedure within four seconds. All doors will unlock when the key is returned to the vertical position. Two-step unlock can be activated by all outside locks on vehicles with keyless entry and anti-theft (if equipped). CHILDPROOF DOOR LOCKS When these locks are set, the rear doors cannot be opened from the...
  • Page 56 Controls and features POWER WINDOWS Press and hold the rocker switches to open and close windows. When AUTO is pressed and released quickly, the driver’s window will open completely without holding the switch down. Each passenger has window controls. • Press the top portion of the rocker switch to close.
  • Page 57 Controls and features • Press the left side of the button to lock. Press the right side to unlock. WINDOW LOCK REAR LIFTGATE The liftgate area is only intended for cargo, not passengers. You can open and close the liftgate from outside the vehicle.
  • Page 58 Controls and features Power mirrors (if equipped) To adjust the power outside mirrors: 1. Select the mirror you want to adjust: Left Driver side mirror Right Passenger side mirror 2. Move the mirror control in the desired direction. 3. Lock the mirror by moving the selector to the center position.
  • Page 59 Controls and features • utility compartment with cassette/compact disc storage and coinholder • compact disc changer • cellular phone Use only soft cups in the cupholder. Hard objects can injure you in a collision. Auxiliary power point The power point is an additional power source for electrical accessories.
  • Page 60 Controls and features 1. Lift the armrest and slide coinholder/tissue tray out of the console in an upward motion. 2. Replace the tissue box. 3. Slide coinholder/tissue tray into console locating pins at bottom of tray. Fit into slots in console bracket.

  • Page 61: Air Vents

    Controls and features Rear console features The rear console incorporates the following features: • air vents • audio system controls • rear seat climate controls • cupholders Refer to the “Audio Guide” for more information on the rear console audio system controls. Rear console climate controls Turn the air distribution control to the desired airflow position.
  • Page 62 Controls and features Select for air to flow through these vents: – VOLUME BAND SEEK MEMORY Select for air to flow through these vents: – VOLUME BAND SEEK MEMORY FLOOR MATS Installing the floor mats 1. Move the driver’s seat to the most rearward position.
  • Page 63 Controls and features against left (outboard) front edge of seat track mounting bracket. 3. Use a screwdriver to screw locator post into vehicle carpeting. Exert pressure while turning to pierce the carpeting. When installed properly, the locator will not screw down tightly, but will rotate freely.
  • Page 64 Controls and features Cargo cover (if equipped) Your vehicle is equipped with a cargo area shade that covers the luggage compartment of your vehicle. To install the shade: 1. Position the shade in mounting brackets as shown. The tongue faces the rear of the vehicle. 2.
  • Page 65 Controls and features 1. Remove the shade from the vehicle and extend it with the smooth grain facing you. 2. Wrap the vinyl around the roller tube twice. Tuck the edges of the vinyl inside the end cap with each wrap.
  • Page 66 Controls and features Illuminated entry system (if equipped) The interior lamps illuminate when: • either front door handle is lifted • the remote entry system is used to unlock the door or sound the personal alarm • or the door is unlocked using the key (if equipped with two-step unlock.
  • Page 67 Controls and features Identifying an armed anti-theft system When the system is armed, the warning light will illuminate for 30 seconds. After 30 seconds, the light will flash. If the system is armed with the doors open, the warning light will stay illuminated until all the doors are closed and then illuminate for 30 seconds and begin flashing.
  • Page 68 Controls and features Disarming a triggered anti-theft system Press either the UNLOCK or PANIC control to disarm a triggered anti-theft system or Unlock any door with the key. A triggered system may also be disarmed by inserting the key and turning the ignition to ACC or ON.
  • Page 69 Controls and features REMOTE ENTRY SYSTEM (IF EQUIPPED) The remote entry system allows you to lock or unlock all vehicle doors without a key. The remote entry system features only operate with the ignition in the Off position. It also arms and disarms the anti-theft system (if equipped).

  • Page 70: Seating And Safety Restraints

    Controls and features Locking the doors Press LOCK to lock all doors. To confirm all doors are closed and locked, press the LOCK control a second time within five seconds. The doors will lock again, the horn will chirp and the lamps will flash. If the horn chirps twice, a door is still ajar and the anti-theft system will not arm.
  • Page 71 Controls and features Pressing UNLOCK once will: • unlock the driver’s door and • move the seat to its corresponding memory seat position. When your dealer programs new transmitters, the order of programming controls seat recall as follows: • First transmitter programmed recalls seat position one •...
  • Page 72 Controls and features 5. Press the door power unlock switch three times. 6. Turn the ignition key back to ON within 30 seconds of step two. 7. The horn should chirp once. If not, wait 30 seconds and repeat steps one through six. 8.
  • Page 73 Controls and features • battery failure • weather conditions • structures around the vehicle Replacement batteries for the remote entry and/or anti-theft system transmitters mat be purchased at pharmacies, watch stores or at authorized dealers. To replace the batteries: 1. Twist a thin coin between the two halves of the transmitter.
  • Page 74 Controls and features KEYLESS ENTRY SYSTEM (IF EQUIPPED) You can lock or unlock the vehicle doors without using a key by using the drivers door keypad. 7 8 9 0 See also Remote entry system (if equipped) in this chapter. The computer code that operates the keyless system is located on your owners wallet card found in...
  • Page 75 Controls and features The system has shut down if the keypad light is out. If the keyless entry system does not work, use the key or remote entry transmitter(s). 1. To unlock the driver door, enter one of the two codes. After pressing the fifth number, the driver door unlocks.
  • Page 76 Controls and features 1. Enter the original permanent code. 2. Press 1/2 within five seconds of step one. 7 8 9 0 3. Wait six seconds. For maximum security, do not set a code that presents the numbers in sequential order or uses the same button five times.
  • Page 77 Controls and features • you shift through R (reverse) • one second has elapsed after the brake pedal is released. The autolock feature repeats when: • a door is opened and then all doors are closed • the brake pedal is released. The autolock feature can be disabled (or reenabled) by using the keyless entry system:...

  • Page 78: Seating And Safety Restraints

    Seating and safety restraints HEAD RESTRAINTS Rear seat head restraints Push to lower the head restraint. Rear seat four-way head restraints (if equipped) Push or pull the head restraint to the desired position.
  • Page 79 Seating and safety restraints SEATING Adjusting bench seating Folding rear seats (if equipped) If your vehicle is equipped with a built-in child safety seat, the seatback cannot be folded down unless the built-in child seat is fully stowed. 1. Press the lower release control downward to unlatch the seatback.
  • Page 80 Seating and safety restraints Manually adjusting the captain’s chair Lift to move the seat forward or backward. Pull up to recline the seat. Adjusting the power front seats (if equipped) Pull up to recline the seat.
  • Page 81 Seating and safety restraints Press to tilt the front of the seat up or down. Press in the desired direction for seat adjust or to move the seat forward or back.
  • Page 82 Seating and safety restraints Press to increase (+ ) or decrease (-) lumbar support. + – Memory seats (if equipped) This system allows automatic positioning of the driver seat to three programmable positions. • To program position one, move the driver seat to the desired position using the seat controls.
  • Page 83 Seating and safety restraints SAFETY RESTRAINTS Important safety restraints precautions The use of safety belts helps to restrain both driver and passengers in case of a collision. In most states and Canada, the law requires the use of safety belts. Always drive and ride with your seatback upright and the lap belt snug and low across...
  • Page 84 Seating and safety restraints Using safety restraints properly Combination lap and shoulder belts Insert the tongue into the slot in the buckle fasten. Push the red release button and remove the tongue from the slot to unfasten. The outboard safety restraints in the vehicle are combination lap and shoulder belts.
  • Page 85 Seating and safety restraints Automatic locking mode In this mode, the shoulder belt is automatically prelocked; however, the belt will retract to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver safety belt. When to use the automatic locking mode •...
  • Page 86 Seating and safety restraints Canceling automatic locking mode Disconnect the combination lap and shoulder belt and allow it to completely retract. This will cancel the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Front seat safety belt height adjustment Adjust the height of the shoulder belt so that the belt rests across...
  • Page 87 Seating and safety restraints Using lap belts Adjusting the lap belt A lap belt is located in the center of the rear seat. To shorten the belt: • Buckle the belt. • Pull the loose end of the belt until snug. To lengthen the belt: •...
  • Page 88 Seating and safety restraints Conditions of operation If ..Then ..The driver’s safety belt is not The safety belt indicator illuminates buckled before the ignition key for 1-2 minutes and the warning is turned to On.
  • Page 89 Seating and safety restraints Safety belt extension assembly The safety belt may be too short even when it is fully extended. Approximately 20 cm (8 inches) may be added to the length of the belt with a safety belt extension (part # 611C22).
  • Page 90 Do not attempt to service, repair, or modify the Air Bag Supplemental Restraint System or its fuses. See your Ford or Lincoln-Mercury dealer. Children and air bags For additional important safety information, read all information on safety restraints in this guide.
  • Page 91 Seating and safety restraints Rear-facing child seats or infant carriers should never be placed in the front seats. How does the air bag supplemental restraint system (SRS) work? The SRS is designed to activate when the vehicle is in a collision, similar to hitting a fixed barrier head on at 12–24 km/h (8–14 mph).
  • Page 92 Seating and safety restraints The air bags inflate and deflate rapidly upon activation. After air bag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (e.g., baking soda) that result from the combustion process that inflates the air bag.
  • Page 93 Seating and safety restraints The diagnostic module monitors its own internal circuits and the supplemental air bag electrical system readiness (including the impact sensors), the system wiring, the air bag system readiness light, the air bag back up power and the air bag ignitors.
  • Page 94 Seating and safety restraints Disposal of air bags and air bag equipped vehicles For disposal of air bags or air bag equipped vehicles, see your local dealership or qualified technician. Air bags MUST BE disposed of by qualified personnel. CHILDREN AND SAFETY RESTRAINTS To prevent the risk of injury, make sure children...
  • Page 95 Seating and safety restraints It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts.
  • Page 96 Seating and safety restraints Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. Children and safety belts Children who are too large for child safety seats (as specified by your child safety seat manufacturer) should always wear safety belts.
  • Page 97 Ford recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position which is...
  • Page 98 Seating and safety restraints anchorage. For more information on top tether straps see Attaching safety seats with tether straps in this chapter. When installing a child safety seat: • Use the correct safety belt buckle for that seating position. • Make sure the tongue is securely fastened in the buckle.
  • Page 99 Seating and safety restraints seat, move the seat as far back as possible. Rear-facing child seats or infant carriers should never be placed in the front seats. 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together.
  • Page 100 Seating and safety restraints 5. To put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard. 6. Allow the belt to retract. The belt will click as it retracts to indicate it is in the automatic locking mode.
  • Page 101 Tether anchor hardware kits (part number 613D74), including instructions, may be obtained at no charge from any Ford or Lincoln-Mercury dealer. Only use the tether attachment hole locations shown in the illustrations. The...
  • Page 102 Seating and safety restraints Built-in child seat (if equipped) The rear seat may be equipped with a built-in child safety seat. This child seat conforms to all federal and Canadian motor vehicle safety standards. Read the labels located on the child seat cushion and shoulder belt for more information on the built-in child seat.
  • Page 103 Seating and safety restraints The second row seatback must be fully locked before operating the child restraint system. Check the position of the seatback release lever. Never use the Built-In Child Seat as a booster cushion with the adult safety belts.
  • Page 104 Seating and safety restraints 3. Lower the child seat cushion. 4. Unfold the cushion protector flap onto adult seat cushion.
  • Page 105 Seating and safety restraints 5. If connected, disconnect the chest clip and buckles. 6. Place the child in the seat and position the left shoulder belt over the child’s left shoulder first, then place the right shoulder belt over the child’s right shoulder. 7.
  • Page 106 Seating and safety restraints If both tongues do not latch in the buckle, do not use the child seat. See your dealer for repairs. 8. Fasten the right and left chest clip halves together and adjust the clip to comfortably hold the shoulder belts in place over the child’s chest.
  • Page 107 Seating and safety restraints Activating the automatic locking mode (ALR) on the built-in child safety seat 1. Fully extend the right shoulder belt. 2. Allow the belts to tighten snugly against the child’s shoulders. Deactivating the automatic locking mode (ALR) on the built-in child safety seat 1.
  • Page 108 Inspecting the built-in child safety seat after a collision Ford recommends that all safety belt assemblies and attaching hardware should be inspected by a qualified technician after any collision.
  • Page 109 Seating and safety restraints All built-in child restraints, including seats, buckles, retractors, seat latches, interlocks, and attaching hardware should be inspected by a qualified dealer technician after any collision.

  • Page 110: Starting

    Starting Important safety precautions A computer system controls the engine’s idle revolutions per minute (RPM). When the engine starts, the idle RPM runs faster to warm the engine. If the engine idle speed does not slow down automatically, have the vehicle checked.
  • Page 111 Starting If you smell exhaust fumes inside your vehicle, have your dealer inspect your vehicle immediately. Do not drive if you smell exhaust fumes. Important ventilating information If the engine is idling while the vehicle is stopped in an open area DOOR LOCK for long periods of time, open the windows at least 2.5 cm (one...
  • Page 112 Starting Improve vehicle ventilation by keeping all air inlet vents clear of snow, leaves and other debris. Guarding against exhaust fumes Although odorless and colorless, carbon monoxide is present in exhaust fumes. Take precautions to avoid its dangerous effects. If you ever smell exhaust fumes of any kind inside your vehicle, have your dealer inspect and fix your vehicle...
  • Page 113 Starting standard requirements regulating the impulse electrical field strength of radio noise. When starting a fuel-injected engine, avoid pressing the accelerator before or during starting. Only use the accelerator when you have difficulty starting the engine. For more information on starting the vehicle, refer to Starting the vehicle in this chapter.
  • Page 114 Starting If starting a vehicle with an automatic transmission: • Make sure the parking brake is set. • Make sure the gearshift is in P (Park). P R N D 2 1 If starting a vehicle with a manual transmission: •...

  • Page 115: Starting The Engine

    Starting CHECK GAGE 50 60 70 o o o 0 0 0 0 0 0 SPEED CONT CHECK GAUGE DOOR km/h RPM x 1000 AJAR R N D 2 1 BRAKE Make sure the following lights illuminate briefly. If a light fails to illuminate, have the vehicle serviced.
  • Page 116 Starting accelerator and start the engine while holding the accelerator down. Release accelerator when engine starts. 4. After idling for a few seconds, apply the brake and release the parking brake. Using the engine block heater (if equipped) An engine block heater warms the engine coolant, which improves starting, warms up the engine faster and allows the...

  • Page 117: Driving

    Driving BRAKES Your brakes are self-adjusting. Refer to the “Service Guide” for maintenance scheduling. Anti-lock brake system (ABS) (if equipped) The ABS operates by detecting the onset of wheel lock up during brake applications and compensating for this tendency. The front wheels are prevented from locking even when the brakes are firmly applied.
  • Page 118 Driving Parking brakes To engage the parking brake: To disengage the parking brake: Always set the parking brake fully and make sure that the gearshift is securely latched in P (Park) (automatic transmission) or in 1 (First) (manual transmission). BRAKE...
  • Page 119 Driving UNDERSTANDING THE TRACTION-LOK REAR AXLE (IF EQUIPPED) This axle provides added traction on slippery surfaces, particularly when one or more wheels are on a surface with poor traction. Extended use of other than matching size tires on a Traction-Lok rear axle could result in a permanent reduction in effectiveness.
  • Page 120 Driving based on driver and road inputs to optimize ride. The combination of firm dampening and height change also provides maximum suspension feedback for improved off-road safety and performance. The vehicle will drop to its lowest position when the ignition is turned to the Off position to provide easy entry and exit to of the vehicle.
  • Page 121 Driving Ride control switch (All wheel drive vehicles with Automatic Ride Control only) The Ride Control switch provides direct control of the Automatic Ride Control system. The switch does not control or change the performance of the All Wheel Drive system. The switch should be placed in the Normal position for all on road and most dirt, gravel or snow covered...

  • Page 122: Roadside Emergencies

    Driving the brake pedal is depressed. If you cannot move the gearshift lever from P (Park) with the brake pedal depressed: 1. Apply the parking brake. 2. Turn the ignition key to Lock, then remove the key. 3. Insert the key and turn the ignition off.
  • Page 123 Driving towing a trailer or heavy loads through heavy terrain. To return to (Overdrive) mode, press the transmission control switch. will remain off. When starting your vehicle, the transmission will automatically return to normal (Overdrive) mode. 2 Second Use the 2 (Second) position to start-up on slippery roads or to provide additional braking on downgrades.
  • Page 124 Driving D Drive Not shown on the display. Activate by pressing the transmission control switch. will illuminate in the instrument cluster. Transmission operates in gears one through four. D (Drive) provides more engine braking than (Overdrive) and is useful when towing a trailer or heavy loads through heavy terrain.
  • Page 125 Driving Driving a manual transmission (if equipped) Using the clutch Vehicles equipped with a manual transmission have a starter interlock that prevents cranking the engine unless the clutch pedal is fully depressed. When starting a vehicle with a manual transmission: 1.
  • Page 126 Driving Upshifts when accelerating (for best fuel economy) 32 km/h (22 11 km/h (9 2 - 3 mph) mph) 50 km/h (33 19 km/h (13 3 -4 mph) mph) 4 - 5 (Overdrive) 71 km/h (41 27 km/h (17 mph) mph) Upshifts when cruising (recommended for best fuel economy) Transfer case position...
  • Page 127 Driving Parking 1. Apply the brake and shift into N (Neutral). 2. Engage the parking brake. 3. Shift into 1 (First). 4. Turn the ignition to Off. Do not park your vehicle in Neutral, it may move unexpectedly and injure someone.
  • Page 128 Driving You can shift into R (Reverse) only by moving the gearshift from left of 3 (Third) and 4 (Fourth) gears before you shift into R (Reverse). This is s special lockout feature that protects you from accidently shifting into R (Reverse) when you downshift from 5 (Overdrive).
  • Page 129 Driving Using the Control Trac system Shifting between 4WD AUTO and 4WD HIGH Either shift can be done at a stop, or at any forward speed. • The 4WD HIGH light will illuminate when you switch the control to 4WD HIGH or turn off if you switch to 4WD AUTO.
  • Page 130 Driving Driving off-road with 4WD Your vehicle is specially equipped for driving on snow, sand, mud or other rough terrain and has operating characteristics that differ from those of other conventional vehicles. When using 4WD, maintain steering wheel control at all times, especially in rough terrain.
  • Page 131 Driving accelerator slowly and avoid spinning the wheels. Driving through mud and water After driving through mud, clean off residue stuck to rotating driveshafts and tires. Excess mud stuck on tires and rotating driveshafts causes an imbalance that could damage drive components.
  • Page 132 Driving Driving Through Water Do not drive quickly through standing water, especially if the depth is unknown. Traction or brake capability may be limited and if the ignition system gets wet, your engine may stall. Water may also enter your engine’s air intake and severely damage your engine.
  • Page 133 Driving When descending a steep hill, avoid sudden braking. Rapid pumping of the brake pedal will help slow the vehicle and still maintain steering control. When speed control is on and you are driving uphill, your vehicle speed may drop considerably, especially if you are carrying a heavy load.
  • Page 134 Driving Allow more stopping distance and drive slower than usual. Consider using one of the lower gears. Control trac system indicator lights 4WD and 4WD LOW indicator lights are located in the instrument cluster. If either light flashes, see your dealer or qualified service technician.
  • Page 135 Driving Utility and four-wheel drive vehicles are NOT designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under off-road conditions. Avoid sharp turns or abrupt maneuvers in these vehicles.
  • Page 136 Driving • GAWR (Gross Axle Weight Rating) — Carrying capacity for each axle system (front and rear). The GAWR is specific to each vehicle and is listed on the Safety Compliance Certification Label on the driver door pillar. • GCW (Gross Combined Weight) —...
  • Page 137 Driving Do not exceed the GVWR or the GAWR specified on the Safety Compliance Certification Label. It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
  • Page 138 Driving TRAILER TOWING Trailer towing with your vehicle may require the use of a trailer tow option package. Trailer towing puts additional loads on your vehicle’s engine, transmission, axle, brakes, tires, and suspension. For your safety and to maximize vehicle performance, be sure to use the proper equipment while towing.
  • Page 139 Driving Do not exceed the maximum loads listed on the Safety Compliance Certification label. For load specification terms found on the label, refer to Loading your vehicle in this chapter. Remember to figure in the tongue load of your loaded vehicle when figuring the total weight.
  • Page 140 Driving TRAILER TOWING TABLE 4X2 MANUAL TRANSMISSION 3,175 0-1,406 4.0 L 3.73 (7,000) (0-3,100) 4-DOOR 0-861 4.0 L 3.27 2,721(6,000) (0-1,900 ) 0-1,315 4.0 L 3.73 3,175(7,000) (0-2,900) TRAILER TOWING TABLE 4X4 MANUAL TRANSMISSION GCWR (Gross Combined Weight Rating)/Trailer Weights 2-DOOR 3.27 2,721...
  • Page 141 Driving TRAILER TOWING TABLE 4X2 AUTOMATIC TRANSMISSION GCWR (Gross Combined Weight Rating)/Trailer Weights Maximum Trailer Weight Maximum Engine Rear Axle GCWR Range Kg(Lb) Frontal Area of (EFI) Ratio Kg(Lb) 0-Maximum Trailer Ft 2-DOOR 3.27 3,175 0-1,360 4.0 L (7,000) (0-3,000) 3.55 3,628 0-1,814...
  • Page 142 Driving TRAILER TOWING TABLE 4X4 AUTOMATIC TRANSMISSION 4,535 0-2,540 4.0 L 3.73 (10,000) (0-5,600) 4,535 0-2,540 4.0 L 4.10 (10,000) (0-5,600) TRAILER TOWING TABLE AWD AUTOMATIC TRANSMISSION GCWR (Gross Combined Weight Rating)/Trailer Weights 4-DOOR 4,990 0-2,902 5.0 L 3.73 (11,000) (0-6,400) NOTES: - For high altitude operation, reduce GCW by 2% per 300 meters...
  • Page 143 Driving Trailer weight range The range is between zero and the maximum trailer weight rating found in this chapter. Using trailer brakes Use electric brakes or manual, automatic or surge type hydraulic brakes that meet Federal and local regulations. Install and adjust brakes according to the manufacturer’s instructions.
  • Page 144 Driving working properly, the warning lights in the instrument cluster may not work properly. Using a hitch Do not use hitches that: • clamp onto the vehicle bumper • attach to the axle. Distribute the load so that only 10 to 15% of the total weight of the trailer is on the tongue.
  • Page 145 Driving Your vehicle can not be flat towed with all wheels on the ground. Servicing while towing If you tow a trailer for long distances, your vehicle requires more frequent service than a vehicle not used for towing. Refer to the “Service Guide” for more information on maintenance intervals.
  • Page 146 Driving USING THE LUGGAGE RACK (IF EQUIPPED) Maximum load is 100 lbs, evenly distributed. If it is not possible to distribute the load, position it as far rearward as possible. Adjustable tie down loops must be used to secure the load. To adjust cross-bar position: 1.

  • Page 147: Roadside Emergencies

    Roadside emergencies HAZARD LIGHTS CONTROL Use only in an emergency to warn traffic of vehicle breakdown, approaching danger, etc. Depress to activate all indicators simultaneously. Depress again to switch off. The warning lights can be operated when the ignition is off.
  • Page 148 Roadside emergencies 1. Turn the ignition switch to the Off position. 2. Check fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pump shut-off switch by pushing in the button on the switch. 4. Turn the ignition switch to the On position.
  • Page 149 Roadside emergencies Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. Even after a fuse is replaced, it will continue to blow if the cause of the overload is not identified and corrected.
  • Page 150 Roadside emergencies Passenger compartment fuse panel Pull the panel out to access the passenger compartment fuse panel. Use the fuse puller tool provided on the fuse panel cover to replace fuses.
  • Page 151 Roadside emergencies Number Fuse Amperage Circuits Protected Rating 7.5 amp Power mirror, power antenna 7.5 amp High-mount brakelamp 15 amp Parking lamp, instrument cluster gauges 10 amp Left headlamp, lamp out warning 10 amp OBD system 7.5 amp Air bag system, blower relay, EATC 7.5 amp Illumination switches...
  • Page 152 Roadside emergencies Number Fuse Amperage Circuits Protected Rating 15 amp PCM system, stoplamps, AWD, anti-lock brake, speed control, trailer tow 10 amp Anti-lock system 7.5 amp Air bag system, instrument cluster 30 amp Wiper run relay 25 amp Cigar lighter 15 amp A/C system 25 amp...
  • Page 153 Roadside emergencies Number Fuse Amperage Circuits Protected Rating 7.5 amp Memory seat, GEM system 10 amp Audio system Not used 7.5 amp Rear blower system 7.5 amp Heated mirror, rear defroster 15 amp High beam lamps 7.5 amp Lux audio system Power distribution box Always replace the cover to the Power Distribution...
  • Page 154 Roadside emergencies Maxi fuses Fuse Amperage Circuits protected Rear window defrost PCM power relay Fuel system, anti-theft system Headlamps ABS system ABS system Trailer park LP and trailer stop LP Battery saver relay and headlamp relay Blower motor Power locks, power windows and power seats PCM memory and...
  • Page 155 PCM diode Relays Relays are located in the power distribution box. Relays receive signals from components or systems and transfer these signals to activate or deactivate other components or systems. Ford recommends that relays be replaced by a qualified service technician.
  • Page 156 Roadside emergencies Relay number Circuits protected Wiper run relay Horn relay Wiper HI/LO relay WOT A/C relay PCM power relay Fuel pump relay Diode number Circuits protected ABS diode PCM diode CHANGING TIRES Tire change procedure 1. Park on a level surface. 2.
  • Page 157 Roadside emergencies 3. Engage the parking brake. 4. Place the automatic transmission gearshift in P (Park). Place the manual transmission gearshift in 1 (First). 5. Block the diagonally opposite wheel. 6. Remove the jack and lug wrench. 7. Remove the jack handle located under the rear seat.
  • Page 158 Roadside emergencies 8. Assemble the jack handle to the lug wrench. 9. Insert the drive section of the jack handle into the actuator hole and turn counterclockwise until the cable is slack enough to allow the spare tire to be pulled rearward from under the vehicle.
  • Page 159 Roadside emergencies 16. Install the lug nuts and tighten until snug. 17. Lower the vehicle and tighten the lug nuts as shown. 18. Unblock the wheels and place the flat tire, jack hhandle and lug wrench away. Stowing flat tires Stow aluminum wheel and tire with the valve stem down.
  • Page 160 Roadside emergencies tire and replace it with a full-size tire as soon as possible. It is not recommended that the vehicle be operated in 4WD HIGH or LOW modes with a temporary spare. If 4WD HIGH or LOW operation is necessary, do not operate above speeds of 16 km/h (10 mph) or for distances above 80 km (50 miles).
  • Page 161 Roadside emergencies Do not push-start your vehicle. You could damage the catalytic converter. For further information, see Jumper Cables in the Index. Batteries contain sulfuric acid which burns skin, eyes, and clothing. Connecting the jumper cables 1. Position the vehicles so that they do not touch one another.
  • Page 162 Roadside emergencies Do not connect the end of the second cable to the negative ([-]) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Jump starting 1. Start the booster vehicle and run the engine at moderately increased speed.
  • Page 163 For vehicles equipped with control trac, the ignition must be in the OFF position when towing. When calling for a tow truck, tell the operator what kind of vehicle you have. A towing manual is available for Ford Motor Company...
  • Page 164 Roadside emergencies for all authorized tow truck operators. Have your tow truck driver refer to this manual for proper hook-up and towing procedures. Neutral tow kit accessory Neutral tow feature is an option which can be activated at any dealership that has a Service Bay Diagnostic System (SBDS).

  • Page 165: Maintenance And Care

    Maintenance and care SERVICE RECOMMENDATIONS To help you service your vehicle: • We highlight do-it-yourself items in the engine compartment for easy location. • As possible, we design parts that can be replaced without tools. • We provide you with a “Service Guide”...
  • Page 166 Maintenance and care could get caught in moving parts. Take precautions with long hair. • Do not work on a vehicle with the engine running in an enclosed space, unless you are sure you have enough ventilation. • Keep all lit cigarettes, open flames and other lit material away from the battery and all fuel related parts.
  • Page 167 Maintenance and care 1. Set the parking brake, depress the clutch and place the gearshift in 1 (First). 2. Turn off the engine and remove the key. 3. Block the wheels to prevent the vehicle from moving unexpectedly.
  • Page 168 Maintenance and care Working with the engine on • Automatic transmission: 1. Set the parking brake fully and ensure the gearshift is securely latched in P (Park). 2. Block the wheels to prevent the vehicle from moving unexpectedly. Do not start your engine with the air cleaner removed and do not remove it while the engine is running.
  • Page 169 Maintenance and care • Manual transmission: 1. Set the parking brake fully, and make sure the gearshift is securely latched in Neutral. 2. Block the wheels to prevent the vehicle from moving unexpectedly. Opening the hood To open the hood: 1.
  • Page 170 Maintenance and care IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 4.0L EFI engine 1. Windshield washer fluid reservoir 2. Engine oil fill cap 3. Transmission fluid dipstick (automatic transmission only) 4. Engine oil dipstick 5. Power steering fluid reservoir 6. Brake fluid reservoir 7.
  • Page 171 Maintenance and care 9. Air filter assembly 10. Engine coolant reservoir 4.0L SOHC engine 1. Windshield washer fluid reservoir 2. Transmission fluid dipstick 3. Engine oil fill cap 4. Engine oil dipstick 5. Brake fluid reservoir 6. Battery 7. Power steering fluid reservoir 8.
  • Page 172 Maintenance and care 5.0L engine 1. Engine coolant reservoir 2. Windshield washer fluid reservoir 3. Engine oil fill cap 4. Transmission fluid dipstick 5. Brake fluid reservoir 6. Power distribution box 7. Battery 8. Radiator cap 9. Power steering fluid reservoir 10.
  • Page 173 Ford warranty. Synthetic engine oils which are CERTIFIED and of the preferred viscosity may be used in your engine.
  • Page 174 Maintenance and care 1. Make sure the vehicle is on level ground. If the engine is warm, turn the engine off and wait a few minutes for the oil to drain into the oil pan. 2. Set the parking brake and ensure the gearshift is securely latched in P (Park).
  • Page 175 Maintenance and care 2. If the fluid level is not within the normal range, add only certified engine oil of the preferred viscosity. Add engine oil through the oil filler cap. Remove the filler cap and use a funnel to pour oil in the opening.
  • Page 176 Ford production and aftermarket (Motorcraft) oil filters are designed for added engine protection and long life. If a replacement oil filter is used that does not meet Ford material and design specifications, startup engine noises or knock may be experienced.
  • Page 177 • If necessary, add brake fluid until the level reaches MAX. Do not fill above this line. • Use only a DOT 3 brake fluid certified to meet Ford specifications. Refer to Lubricant specifications in the Capacities and specifications chapter.
  • Page 178 If the fluid level drops, maintain the fluid level at the reservoir indicator. Use only DOT 3 brake fluid designed to meet Ford specifications. Refer to the Capacities and specifications chapter. 1. Clean the reservoir cap before removal to prevent contaminants from entering the reservoir.
  • Page 179 Maintenance and care Checking and adding washer fluid for the windshield If a visual inspection shows that washer fluid needs to be added to the reservoir: 1. Lift the windshield reservoir cover. 2. Add enough washer fluid to fill the reservoir. Checking and adding washer fluid for the rear window The washer fluid for both the...
  • Page 180 Maintenance and care ENGINE COOLANT MAINTENANCE Checking and adding engine coolant Check the level of the coolant in the reservoir at least once a month. Be sure to read and understand Precautions when servicing your vehicle in this chapter. If the engine coolant has not been checked for a long period of time, the engine coolant reservoir may eventually empty.
  • Page 181 Ford recommends Ford Premium Cooling System Fluid, which is an optimized formula that will protect all metals and rubber elastomers used in Ford engines for four years or 80,000 km (50,000 miles). It is neither necessary nor recommended to use supplemental coolant additives in your gasoline-powered vehicle.
  • Page 182 Ford and Lincoln-Mercury dealers use recycled engine coolant produced by Ford-approved processes. Not all coolant recycling processes produce coolant which meets Ford specification ESE-M97B44–A, and use of such coolant may harm engine and cooling system components. Always dispose of used automotive fluids in a responsible manner.
  • Page 183 Maintenance and care freeze at the temperature level in which you drive during winter months. Never increase the engine coolant concentration above 60%. Leave a 50/50 mixture of engine coolant and water in your vehicle year-round in non-extreme climates. Adding engine coolant 1.
  • Page 184 Maintenance and care Checking the cooling system hoses Inspect all engine and heater system hoses and hose connections for: • deterioration • leaks • loose hose clamps CHECKING AND ADDING POWER STEERING FLUID Check the power steering fluid at least twice a year by completing the following steps: 1.
  • Page 185 Maintenance and care 2. When the engine coolant temperature gauge reaches the normal zone, turn off the engine. 3. Open the hood.
  • Page 186 Maintenance and care 4. Visually inspect the fluid level in the power steering reservoir. 5. If necessary, add power steering fluid until the fluid level reaches MAX. Do not overfill the reservoir. • As a maintenance precaution, visually inspect the lines and hoses of the power steering system for leaks and damage.
  • Page 187 3. Add enough fluid through the filler opening so that the fluid level is at the bottom of the opening. Use only fluid that meets Ford specifications. Refer to the Capacities and specifications chapter for more information on manual transmission fluid.
  • Page 188 Maintenance and care lubricate the driveline joint according to the maintenance intervals specified in the Service Guide. CHECKING AND ADDING DIFFERENTIAL FLUID (IF EQUIPPED) To check and add differential fluid, follow these steps: 1. Clean the filler plug. 2. Remove the filler plug and inspect fluid level.
  • Page 189 Maintenance and care replacement, it may be replaced with a low-maintenance battery. For information on appropriate replacement batteries, refer to Motorcraft parts in the Capacities and specifications chapter. Applying too much pressure on the ends when lifting a battery could cause acid to spill.
  • Page 190 Maintenance and care water. If necessary, distilled water may be substituted with tap water that is not hard and does not have high mineral or alkali content. If the battery needs water often, have the charging system checked for a possible malfunction. Relearning the idle function Because your vehicle’s engine is electronically controlled, some...
  • Page 191 Maintenance and care 1. Put the automatic transmission gearshift in P (Park). Put the manual transmission gearshift in N (Neutral). 2. Turn off all accessories and start the vehicle. 3. Let the engine idle for at least one minute. 4. The relearning process will automatically complete as you drive the vehicle.
  • Page 192 Maintenance and care Always dispose of automotive batteries in a responsible manner. Follow your community’s local standards for disposal. Call your local recycling center to find out more about recycling automotive batteries. Battery saver control feature Your vehicle is equipped with a battery saver control feature designed to prevent your battery from accidental wear down due to...
  • Page 193 Maintenance and care Changing your air cleaner filter To change your air cleaner filter, follow these steps: 1. Release the clamp locking clip on the front portion of the assembly. 2. Swing the left side of the assembly open. 3. Remove the air cleaner filter element from the open end of the engine air cleaner assembly and replace it with a new element.
  • Page 194 Maintenance and care To make reaching the wiper blades easier, simply: 1. Turn the ignition to the ON position and turn the wipers on. 2. Wait for the wipers to reach a vertical position and turn the 50 60 70 ignition to LOCK.
  • Page 195 Maintenance and care The blade lengths for your vehicle are as follows: • Windshield wiper blades — 56 cm (16 in) • Liftgate wiper blades — 41 cm (22 in) To replace the wiper blades: 1. Pull the wiper arm away from the windshield and lock into service position.
  • Page 196 Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford to give you the following information about tire grades exactly as the government has written it. Treadwear The treadwear grade is a...
  • Page 197 Maintenance and care Warning: The traction grade assigned to this tire is based on braking (straightahead) traction tests and does not include cornering (turning) traction. Temperature A B C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under...
  • Page 198 Maintenance and care necessary. To check the tire pressure, insert the tire pressure gauge into the valve stem. The cold pressure amount is listed on the Safety Compliance Certification label. Improperly inflated tires can affect vehicle handling and can fail suddenly, possibly resulting in loss of vehicle control.
  • Page 199 Maintenance and care • Five tire rotation Replacing tires Replace the tires when the wear band is visible through the tire treads. When replacing full size tires, never mix radial, bias-belted, or bias-type tires. Use only the tire sizes that are listed on the tire pressure decal.
  • Page 200 Refer to the Safety Compliance Certification label to determine the specific size tire and wheel Ford Motor Company recommends for use on this vehicle. When purchasing replacement tires for your vehicle, consult your...
  • Page 201 The tires on your vehicle have all-weather treads to provide traction in rain and snow. However, in some climates, using snow tires and chains may be necessary. Ford offers snow chains as a Ford approved accessory and recommends use of these or their equivalents.
  • Page 202 If equipped with 110 cm (17 inch) tires, your vehicle will not accommodate snow chains. Consult your dealer for information on other Ford approved methods of traction control. IMPORTANT FUEL INFORMATION Important safety precautions Do not overfill the fuel tank.
  • Page 203 Maintenance and care The fuel system may be under pressure. If the fuel cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the cap. Automotive fuels can cause serious injury or death if misused or mishandled.
  • Page 204 Breathing gasoline vapors or skin contact could cause an adverse reaction. Consult a physician immediately. Cleaner air Ford approves the use of gasolines to improve air quality, including reformulated gasolines, that contain oxygenates such as a maximum of 10% ethanol or 15% MTBE.
  • Page 205 Maintenance and care Fuel quality If you are experiencing starting, rough idle or hesitation problems try a different brand of fuel. If the condition persists, see your dealer or a qualified service technician. The American Automobile Manufacturers Association (AAMA) issued a gasoline specification to provide information on high quality fuels that optimize the performance of your vehicle.
  • Page 206 Maintenance and care though your engine will perform adequately on other gasolines, the performance of the emission control devices and systems may be adversely affected. Repair of damage caused by using a fuel that your vehicle was not designed for may not be covered by your warranty.
  • Page 207 Guide” are required because they are considered essential to the life and performance of your vehicle and to its emissions system. If other than Ford, Motorcraft or Ford authorized parts are used for maintenance replacements or for service of components affecting...
  • Page 208 Maintenance and care Watch for fluid leaks, strange odors, smoke, loss of oil pressure, the charging system warning light, the “Service Engine Soon” light or the temperature warning light. These events could indicate that the emission control system is not working properly.
  • Page 209 Maintenance and care the on-board diagnostic (OBD-II) system. If your “check engine/service engine soon” light is on, reference the applicable light description in the Warning Lights and Gauges section of your owners guide. Your vehicle may not pass the I/M test with the “check engine/service engine soon”...
  • Page 210 Maintenance and care REPLACING VEHICLE BULBS Replacing the exterior bulbs Check the operation of the following exterior lamps frequently: • headlamps • foglamps (if equipped) • high-mount brakelamp • license plate lamp • tail lamps • back-up lamps Do not remove lamp bulbs unless they will be replaced immediately with new ones.
  • Page 211 Maintenance and care Replacing the headlamps 1. With the flat side of the bulb’s base facing upward, insert the glass end of the bulb into the socket. Turn the bulb left or right to line up the grooves in the LIFT plastic base with the tabs in the socket.
  • Page 212 Maintenance and care 4. Lock the bulb assembly into place by turning it clockwise until it stops. Highmount brakelamp The highmount brakelamp is located just above the rear liftgate window. For bulb replacement, see a dealer or qualified service technician. License plate lamps To change either of the license plate lamp bulbs, follow this...
  • Page 213 Maintenance and care Replacing the interior bulbs Check the operation of the following interior bulbs frequently: • interior overhead lamp • map lamp • courtesy and cargo lamps Map lamps To change the map lamp bulbs: 1. Use a small screwdriver to pry off the lens.
  • Page 214 Maintenance and care Function Number of bulbs Trade number Cargo lamp 211-2 Interior overhead lamp 912 (906) Front door courtesy lamp Map lamps 168 (T10) Ashtray lamp Glove compartment lamp AIMING THE HEADLAMPS The alignment of your headlamps should be checked by a qualified service technician if: •...
  • Page 215 Maintenance and care CLEANING AND CARING FOR YOUR VEHICLE Refer to the “Customer Assistance Guide” for a list of Ford-approved cleaners, polishes and waxes. Washing your vehicle Wash your vehicle regularly with cold or lukewarm water. Never use strong detergents or soap. If your vehicle is particularly dirty, use a quality car wash detergent.
  • Page 216 Minor scratches or paint damage from road debris may be repaired with touch-up paint, paint repair foil or aerosol paint spray from the Ford accessory line. Observe the application instructions on the products. Remove particles such as bird droppings, tree sap, insect remains, tar spots, road salt and industrial fallout immediately.
  • Page 217 Maintenance and care high pressure fluid could penetrate the sealed parts and cause damage. • Do not spray with cold water to avoid cracking the engine block. • Cover the highlighted areas to prevent water damage when cleaning the engine.
  • Page 218 Maintenance and care • Never wash or rinse the engine while it is running; water in the running engine may cause internal damage. Cleaning plastic exterior parts Use a vinyl cleaner for routine cleaning of plastic. Clean with a tar remover if necessary.
  • Page 219 Maintenance and care windshield wiper solution or a mild detergent. Rinse thoroughly with clean water. To avoid damaging the blades, do not use fuel, kerosene, paint thinner or other solvents. Cleaning the instrument panel 50 60 70 o o o 0 0 0 0 0 0 km/h RPM x 1000...
  • Page 220 (if equipped), child safety seat tether bracket assemblies (if equipped) and attaching hardware should be inspected after any collision. Ford recommends that all safety belt assemblies used in vehicles involved in a collision be replaced. However, if the collision was minor...
  • Page 221 Maintenance and care The child seat liner is removable and may be machine-washed and air dried.

  • Page 222: Capacities And Specifications

    Capacities and specifications MOTORCRAFT PART NUMBERS Component 4.0L EFI 4.0L SOHC 5.0L engine engine engine Air filter FA-1616 FA-1658 FA-1658 Fuel filter FG-872 FG-872 FG-872 Battery BXT-58 BXT-58 BXT-65-650 (standard) Battery BXT-65-650 BXT-65-650 BXT-65-850 (optional) Oil filter FL-1A FL-1A FL-820S PCV valve EV-225 EV-225...
  • Page 223 Capacities and specifications REFILL CAPACITIES Fluid Ford Part Application Capacity-liters Name (quarts) Engine oil Motorcraft 5W30 All engines (including filter Super Premium 4.7 (5.0) change) Motor Oil Brake fluid Ford High Performance Fill to line in DOT 3 Brake reservoir...
  • Page 224 If your vehicles is equipped with a limited slip differential, add 4 ounces of additive friction modifier C8AZ-19B546-A, Ford specification EST-M2C118–A, for complete refill of 8.8 inch and 9.75 inch rear axles. Vehicles equipped with 4.0L SOHC or 4.0L EFI engines and...
  • Page 225 Capacities and specifications in water. For Traction-Lok rear axles, add 4 ounces of additive friction modifier C8AZ-19B546-A, Ford specification EST-M2C118–A, whenever the lubricant is changed. Refer to your “Service Guide” for axle fluid change intervals. SPECIFICATIONS Lubricant specifications Ford Part...
  • Page 226 Capacities and specifications Ford Part Ford Part Ford Item Name Number Specification Hydraulic clutch High master cylinder Perfromance C6AZ-19542-AB ESZ-M6C25-A and brake DOT 3 Brake master cylinder Fluid Driveshaft, slip Premium Long sline, universal XG-1-C or K ESA-M1C75-B Life Grease...
  • Page 227 XG-1-G or K ESA-M1C75-B Long-Life Grease Slip Shaft 4.0 L Explorer Conventional and Traction-lok rear axles are filled with XY-80W90–QL, Ford specification WSP-M2C197–A. 5.0 L Explorer Conventional and Traction-Lok rear axles are filled with Motorcraft Premium Synthetic rear axle lubricant, F1TZ-19580–B,...
  • Page 228 Capacities and specifications Add 4–ounces of additive friction modifier C8AZ-19B546–A, Ford specification EST-M2C118–A, for complete Traction-lok rear axles. ENGINE DATA 4.0L 2V V-6 Engine 4.0L 2V V-6 5.0L 2V V-8 SOHC Cubic inches Horsepower 160 @ 4200 rpm 205 @ 5000 rpm 211 @ 4600...
  • Page 229 Capacities and specifications...
  • Page 230 Capacities and specifications IDENTIFYING YOUR VEHICLE Vehicle identification tag The vehicle identification tag is located on the front panel of the engine compartment. This tag bears technical information on your vehicle and identifies various components. Vehicle identification number The vehicle identification number (VIN) is attached to a tag and is located on the front driver’s side of the instrument panel.
  • Page 231 Capacities and specifications Engine number The engine number is stamped on the engine block.

  • Page 232: Reporting Safety Defects

    National Highway Traffic Safety Administration (NHTSA) in addition to Ford Motor Company. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

  • Page 233: Index

    Index Air bag supplemental restraint engine compartment ....216 system fabric ........219 and child safety seats ....90 instrument panel ....219 description ........89 plastic parts ......218 disposal ........94 safety belts ......220 indicator light ......93 tail lamps .........218 passenger air bag .....91 washing ........215 Air cleaner filter .......192 waxing ........215 replacing ........193...
  • Page 234 Flashing the lights ......45 Lights, warning and indicator Floor mats ......62,63 air bag ........11 Foglamps ........27 anti-lock brakes (ABS) ....11 Ford Extended Service Plan ..129 anti-theft ........9 Four way head restraints ...78 brake ..........11 Four-Wheel Drive vehicles charging system ......10 control trac ......38,128...
  • Page 235 Index Power door locks ......54 preparing to start your Power steering vehicle ........112 fluid, checking and adding ..184 starting a warm engine ..115 Rear window Steering wheel wiper ........37,38 tilting .........44 Refill capacities for fluids ..223 Storage compartments Relays ......149,150,153 overhead storage Remote entry system ....69 compartment ......52...
  • Page 236 Voltmeter (see Battery voltage Windshield washer fluid and gauge) ..........15 wipers ........193 Warning chimes checking and adding fluid ..178 headlamps on ......11 checking and replacing wiper key in ignition ......12 blades .......193,194 safety belt .........12 liftgate reservoir .....179 Washer fluid operation ........46 reservoir ........179 specifications ......178...

  • Page 237: Filling Station Information

    Filling station information FILLING STATION INFORMATION Fuel Unleaded fuel only - Octane 87 Fuel tank capacity (2 door) 66.2 L (17.3 gallons) Fuel tank capacity (4 door) 79.5 L (20.8 gallons) Engine oil Use only engine oil displaying the American Petroleum Institute certification mark.

This manual is also suitable for:

Explorer

Table of Contents

Save PDF