1997 Aerostar/Ranger
a. 8 Nm (6 lb-ft)
b. 15 Nm (11 lb-ft)
c. 22 Nm (16 lb-ft)
3. Apply Silicone Rubber D6AZ-19562-BA or equivalent meeting Ford specifications ESB-M4G92-A and
ESE-M4G195-A to the four locations at the joint where the intake manifold and the cylinder heads
(6049) meet (as shown).
4. Install valve covers (6582) as outlined in this section.
5. Connect the fuel supply and return lines at the fuel supply manifold as outlined in
6. Install upper intake manifold as outlined in this section.
7. NOTE: It is important to follow the coolant filling procedure described in
Fill and bleed the cooling system as detailed in
8. Check the fuel system for leaks as outlined.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C18.HTM~gen~ref.HTM
Section 03-03
.
tomsn048@gmail.com
Page 4 of 5
Section 03-04C
.
Section 03-03
.
2011-04-27