Ford Aerostar 1997 Workshop Manual page 49

1997 Aerostar/Ranger
1 6256
2 —
3 6K297
4 —
5 6306
6 6K254
5. Install the camshaft sprocket retaining bolt, and tighten to 60-68 Nm (44-50 lb-ft).
6. Remove the clip from the timing chain/belt tensioner.
7. Check the camshaft end play as outlined in
8. Install the engine front cover as outlined in this section. On Aerostar, install the radiator.
9. Fill and bleed the cooling system. Refer to
10. Fill the crankcase with clean engine oil of the recommended grade and viscosity.
11. Start the engine and operate at fast idle. Check for coolant and oil leaks.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C24.HTM~gen~ref.HTM
Camshaft Sprocket
Camshaft Timing Mark
(Part of 6256)
Timing Chain Guide
Crankshaft Timing Mark
(Part of 6306)
Crankshaft Sprocket
Timing Chain/Belt Tensioner
Section 03-00
Section 03-03 .
tomsn048@gmail.com
.
Page 4 of 4
2011-04-27