Ford Aerostar 1997 Workshop Manual page 164

1997 Aerostar/Ranger
37. Install crankshaft front seal (6700), gasket, and front cover. Tighten cover bolts to 17-21 Nm (13-15
lb-ft).
38. Install crankshaft vibration damper and pulley as detailed in this section. Tighten bolt to 40-50 Nm
(30-37 lb-ft). Then tighten bolt another 85 degrees.
39. Install crankshaft position sensor and tighten bolts to 9-12 Nm (80-106 lb-in).
40. Install the oil filter adapter (6881), oil cooler (if equipped) and a new oil bypass filter (6714).
Oil Pan, Installation
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C45.HTM~gen~ref.HTM
tomsn048@gmail.com
Page 15 of 34
2011-04-27