1997 Aerostar/Ranger
2. Position No. 1 cylinder to TDC between compression and ignition stroke. (Both intake and exhaust
valves must be closed with TDC mark on vibration damper at pointer.)
3. Lubricate oil pump drive pinion and O-ring on assembled oil pump drive gear and CID sensor with
SM-2C 1013-A oil. Do not get oil above mounting flange.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C45.HTM~gen~ref.HTM
tomsn048@gmail.com
Page 28 of 34
2011-04-27