Ford Aerostar 1997 Workshop Manual page 38

1997 Aerostar/Ranger
11 3A674 Power Steering Pump
12 N606572-S2 A/C Compressor Mounting Bracket Bolts (3 Req'd)
13 N800199- Power Steering Pump Bolts (3 Req'd)
S309
14 N620481-S2 A/C Compressor Mounting Bracket Brace Nuts (2
Req'd)
15 3C718 A/C Compressor Mounting Bracket Brace
16 N606068-S2 Generator Bolts (3 Req'd)
17 10153 Generator Mounting Bracket
18 N802096-S2 Water Pump Pulley Bolts (4 Req'd)
19 N605805-S2 Drive Belt Tensioner Bolt
20 8509 Water Pump Pulley
21 N606068-S2 Generator Mounting Bracket Bolts (3 Req'd)
A — Tighten to 22-28 Nm (17-20 Lb-Ft)
B — Tighten to 40-55 Nm (30-40 Lb-Ft)
1. Drain the coolant. Detach the lower radiator hose (8286) and the heater return hose from the water
pump (8501). Refer to
2. Remove fan blade (8600) and fan clutch (8A616) assembly using Fan Clutch Holding Tool T84T-
6312-C and Fan Clutch Nut Wrench T84T-6312-D.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C22.HTM~gen~ref.HTM
Section 03-03 .
tomsn048@gmail.com
Page 3 of 5
2011-04-27