Ford Aerostar 1997 Workshop Manual page 194

1997 Aerostar/Ranger
Section 03-01C: Engine, 4.0L V-6
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Cylinder Block, Bare
Before replacing a cylinder blocks (6010), determine if it is repairable. If so, make the necessary repairs
following the procedures given in
Disassembly
1. Completely disassemble the old engine.
2. Remove core plugs as outlined in
3. Remove oil gallery pipe plugs.
4. NOTE: A rifle-cleaning brush is helpful for cleaning engine oil galleries.
Clean cylinder blocks and inspect as outlined in
Assembly
1. If using new or reconditioned cylinder block uncrate and clean preservative materials according to
supplier's instructions.
2. Position the new cylinder blocks in a work stand and install all serviceable parts removed from the old
cylinder blocks.
3. Check all assembly clearances and correct as necessary.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31C49.HTM~gen~ref.HTM
Section 03-00 .
Section 03-00 .
Section 03-00
tomsn048@gmail.com
1997 Aerostar, Ranger Workshop Manual
.
Page 1 of 2
2011-04-27