Table of Contents
Advertisement
Note:
VCA Resource function varies according to different camera models.
VCA options are mutually exclusive.
The function may not be supported by some camera models.
Operating PTZ Control
Purpose:
In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom
control of the camera.
Note:
To realize PTZ control, the camera connected to the network must support the
PTZ function or have a pan/tilt unit installed to the camera. Please properly set the
PTZ parameters on RS485 settings page referring to Section 6.2.4 RS485 Settings.
5.5.1 PTZ Control Panel
On the live view page, click
the PTZ control panel and click
Click the direction buttons to control the pan/tilt movements.
Click the zoom/focus/iris buttons to realize lens control.
Notes:
There are eight direction arrows ( ,
panel. Click the arrows to realize adjustment in the relative positions.
Network Camera User Manual
next to the right side of the live view window to show
to hide it.
PTZ Control Panel
,
,
40
,
,
,
,
) in the control
Advertisement
Table of Contents
