Table of Contents
Advertisement
Icon
/
/
/
/
Note:
The icons vary according to the different camera models.
Recording and Capturing Pictures Manually
In the live view interface, click
to record the live view. The saving paths of the captured pictures and clips can be
set on the Configuration > Local page. To configure remote scheduled recording,
please refer to Section 6.1.
Note:
The captured image will be saved as JPEG file or BMP file in your computer.
Operating PTZ Control
Purpose:
In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom
control of the camera.
Note:
To realize PTZ control, the camera connected to the network must support the
PTZ function or have a pan/tilt unit installed to the camera. Please properly set the
PTZ parameters on RS485 settings page referring to Section 6.2.4 RS485 Settings.
PTZ Control Panel
On the live view page, click
the PTZ control panel and click
Click the direction buttons to control the pan/tilt movements.
Network Camera User Manual
Description
Manually start/stop recording.
Audio on and adjust volume /Mute.
Turn on/off microphone.
Start/stop digital zoom function.
on the toolbar to capture the live pictures or click
next to the right side of the live view window to show
to hide it.
37
Advertisement
Table of Contents
