DAP-1360 Wireless N300 Access Point & Router
User Manual
Static IP + PPPoE Connection
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough at this step to configure a connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
Figure 80. Configuring Static IP + PPPoE WAN connection.
Page 110 of 270
Configuring Device (Router Mode)