DAP-1360 Wireless N300 Access Point & Router
User Manual
In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page.
Figure 92. Configuring Dynamic IP + PPPoE WAN connection.
Page 123 of 270
Configuring Device (Router Mode)