Dynamic Ip + Pppoe Connection - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

Dynamic IP + PPPoE Connection

If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server
addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough at this step to configure a connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
Figure 88. Configuring Dynamic IP + PPPoE WAN connection.
Page 119 of 270
Configuring Device (Router Mode)