D-Link DAP-1360 User Manual page 27

DAP-1360 Wireless N300 Access Point & Router
User Manual
9. In the opened window, in the list of available wireless networks, select the wireless network
DAP-1360 and click the Connect button.
10. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
Now you can connect to the web-based interface of DAP-1360 for configuring all needed
parameters. To gain access to an external network (to the Internet), you also need to specify the
default gateway and the addresses of DNS servers.
If you perform initial configuration of the access point via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the access point you will need
to reconfigure the wireless connection using the newly specified settings.
Figure 16. The list of available networks.
Page 27 of 270
Installation and Connection