D-Link DAP-1360 User Manual page 67

DAP-1360 Wireless N300 Access Point & Router
User Manual
The following fields are available on the page:
Parameter
WDS Mode
WDS Encryption
Encryption Key
WDS MAC (1-4)
The WDS function parameters specified on the page must be the same for all
!
interconnected devices. In addition, it is required to set the same channel (on the Wi-Fi /
Basic settings page).
When you have configured the parameters, click the Apply button.
The WDS function mode.
Disable: The function is disabled.
Bridge mode: Access points communicate to each other only,
wireless devices cannot connect to them.
Repeater mode: Access points communicate to each other,
wireless clients can connect to the WLAN created by interconnected
access points.
A type of encryption for data transfer between access points
interconnected via the WDS function.
NONE: No encryption.
WEP.
TKIP.
AES.
A key for the specified type of encryption. If the NONE value is
selected from the WDS Encryption drop-down list, the field is not
editable.
The MAC addresses of devices connected to the access point via the
WDS function.
Page 67 of 270
Configuring Device (Access Point Mode)
Description