Local Update - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

Local Update

!
Attention! Do not turn off the
This may cause the device breakdown.
To update the firmware of the
1. Download a new version of the firmware from www.dlink.ru.
2. Click the Browse button on the System / Firmware upgrade page to locate the new
firmware file.
3. Click the Update button to upgrade the firmware of the
4. Wait until the
5. Log into the web-based interface using the login (admin) and the current password.
After the upgrade is completed, the new version of the firmware will be displayed in the top left
corner of the page.
If after updating the firmware the
default settings. To do this, place the mouse pointer over the System caption in the top left corner
of the page and click the
access point
access point
access point is rebooted (about one and a half or two minutes).
access point
(Reset to factory) icon. Wait until the
before the firmware upgrade is completed.
locally, follow the next steps:
doesn't work correctly, please restore the factory
Page 84 of 270
Configuring Device (Access Point Mode)
access point.
access point is rebooted.