D-Link DAP-1360 User Manual page 215

DAP-1360 Wireless N300 Access Point & Router
User Manual
Parameter
Enable Encryption WEP
Default Key ID
Encryption Key WEP
as HEX
WEP key length
Encryption Key WEP (1-
4)
The checkbox activating WEP encryption. When the checkbox is
selected, the Default Key ID field, the Encryption Key WEP as
HEX checkbox, the WEP key length drop-down list, and four
Encryption Key WEP fields are displayed on the page. For the
Shared authentication type the checkbox is always selected.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for
encryption.
The length of WEP encryption key.
Select the value 64bit to specify keys containing 5 ASCII symbols
or 10 HEX symbols.
Select the value 128bit to specify keys containing 13 ASCII
symbols or 26 HEX symbols.
Keys for WEP encryption. The access point uses the key selected
from the Default Key ID drop-down list. It is required to specify all
the fields.
Page 215 of 270
Configuring Device (Router Mode)
Description