Upnp Igd - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

UPnP IGD

On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The access point
uses the UPnP IGD protocol for automatic configuration of its parameters for network applications
requiring an incoming connection to the access point.
If you want to manually specify all parameters needed for network applications, deselect the
Enabled checkbox and click the Apply button.
If you want to enable the UPnP IGD protocol in the access point, select the Enabled checkbox and
click the Apply button.
When the protocol is enabled, the access point's parameters configured automatically are displayed
on the page:
Parameter
Protocol
IP
Private port
Public port
Comments
Figure 183. The Advanced / UPnP IGD page.
A protocol for network packet transmission.
The IP address of a client from the local area network.
A port of a client's IP address to which traffic is directed from a
public port of the access point.
A public port of the access point from which traffic is directed to a
client's IP address.
Information transmitted by a client's network application.
Page 236 of 270
Configuring Device (Router Mode)
Description