D-Link DAP-1360 User Manual page 103

DAP-1360 Wireless N300 Access Point & Router
User Manual
Figure 73. Configuring Static IP WAN connection. The expert settings mode. The Ethernet section.
Parameter
Connection name
MTU
MAC
A name for connection for easier identification.
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address icon (
address of the network interface card (of the computer that is being
used to configure the access point at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the access
point's LAN at the moment. To do this, select the relevant value
from the drop-down list (the field will be filled in automatically).
Page 103 of 270
Configuring Device (Router Mode)
Description
) to set the MAC