D-Link DAP-1360 User Manual page 130

DAP-1360 Wireless N300 Access Point & Router
User Manual
Figure 98.
Parameter
Isolate connection
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
Click the Next button to continue.
Configuring PPTP + Static IP WAN connection. The expert settings mode.
The Miscellaneous section.
Miscellaneous
When the checkbox is selected, the
routing table for this connection. Select the checkbox only when
your ISP requires this.
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the
requests from the external network through this connection. For
security reasons, it is recommended not to select this checkbox.
Description
Page 130 of 270
Configuring Device (Router Mode)
access point uses an alternate
access point to answer ping