D-Link DAP-1360 User Manual page 74

DAP-1360 Wireless N300 Access Point & Router
User Manual
Parameter
Default Key ID
Encryption Key WEP as
HEX
WEP key length
Encryption Key WEP (1-
4)
When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication type is
selected, the following fields are available:
Parameter
Encryption Key PSK
WPA Encryption
When you have configured the parameters, click the Apply button.
In addition, when the Enable client checkbox is selected, the list of available wireless networks is
displayed on the page.
To view the latest data on the available wireless networks, click the Search button.
To connect to a wireless network from the list, select the needed network. Upon that the relevant
values are automatically inserted in the SSID, BSSID, and Network Authentication fields.
For the Open authentication type with no encryption, click the Apply button.
For the Open authentication type with encryption and the Shared authentication type, select a
needed value from the Default Key ID drop-down list. If needed, select the Encryption Key
WEP as HEX checkbox to set a hexadecimal number as a key for encryption. Then select a needed
value in the WEP key length drop-down list, fill in 4 Encryption Key WEP fields, and click the
Apply button.
For the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication types, fill in
the Encryption Key PSK field and click the Apply button.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for
encryption.
The length of WEP encryption key.
Select the value 64bit to specify keys containing 5 ASCII symbols
or 10 HEX symbols.
Select the value 128bit to specify keys containing 13 ASCII
symbols or 26 HEX symbols.
Keys for WEP encryption. The
from the Default Key ID drop-down list. It is required to specify
all the fields.
A key for WPA encryption. The key can contain digits and/or Latin
characters.
An encryption method: TKIP, AES, or TKIP+AES.
Page 74 of 270
Configuring Device (Access Point Mode)
Description
access point uses the key selected
Description