D-Link DAP-1360 User Manual page 113

DAP-1360 Wireless N300 Access Point & Router
User Manual
Figure 83. Configuring Static IP + PPPoE WAN connection. The expert settings mode.
Parameter
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
Click the Next button to continue.
The Miscellaneous section.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the
requests from the external network through this connection. For
security reasons, it is recommended not to select this checkbox.
Page 113 of 270
Configuring Device (Router Mode)
Description
access point to answer ping