Table of Contents
Advertisement
Web User Interface
The Wireless Resource Control window is used to configure the wireless connection settings so that the device can detect the better wireless
connection in your environment.
Airtime Fairness
Click the drop-down menu to enable or disable
the airtime fairness function.
Band Steering
Click the drop-down menu to enable the Band
Steering function. When the wireless clients
support both 2.4GHz and 5GHz and the 2.4GHz
signal is not strong enough, the device will use
5GHz as higher priority.
Wireless Band
Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Connection Limit
Click the drop-down menu to enable or disable
the connection limit function. The option is for
load balancing. This determines whether to limit
the number of users accessing this device. The
exact number is entered in the User Limit field
below. This feature allows the user to share the
wireless network traffic and the client using
multiple APs. If this function is enabled and
when the number of users exceeds this value,
or the network utilization of this AP exceeds
the percentage that has been specified, the
DAP-2620 will not allow clients to associate with
the AP.
User Limit (1 - 64)
This function is only available when Connection
Limit is enabled. Set the maximum amount of
users that are allowed access (1 - 64 users) to the
device using the specified wireless band.
11n Preferred
This function is only available when Connection
Limit is enabled. Use the drop-down menu to
enable the 11n Preferred function. The wireless
clients with 802.11n protocol will have higher
priority to connect to the device.
D-Link DAP-2620 User Manual
Wireless Resource Control
28
Advertisement
Table of Contents
