D-Link DAP-1360 User Manual page 150

DAP-1360 Wireless N300 Access Point & Router
User Manual
On the next page, you can specify an individual name (SSID) and security settings for the access
point or configure the parameters identical with the network to which you connect.
Figure 116. The page for changing the settings of the wireless local area network.
If you want to leave the name of the wireless network and security settings identical with the
network to which you connect, click the Next button.
If you want to configure individual settings for the access point, deselect the Use the same
security and network key as those for the exiting network checkbox and enter a name for
the wireless network in the SSID field. It is strongly recommended to configure the secure wireless
network of DAP-1360. To do this, select the Protected value from the Network Authentication
drop-down list and enter a key (a password that will be used to access your wireless network) in the
Network key field. Use digits and Latin characters. After applying this setting, the WPA-
PSK/WPA2-PSK mixed authentication type is specified for the WLAN of the access point. Click
the Next button.
On the next page, the parameters of the network to which you want to connect, the entered
password, and the settings of the wireless network of the access point are displayed. Make sure that
the specified settings are correct and then click the Apply button. After that, the wireless channel of
DAP-1360 will switch to the channel of the wireless access point to which you have connected.
After configuring the device as a repeater, you need to create a WAN connection with relevant
parameters for the WiFiClient interface.
After clicking the Apply button, the Home / Information page opens.
Page 150 of 270
Configuring Device (Router Mode)