Advanced; Dns - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

Advanced

In this menu you can add name servers.

DNS

On the Advanced / DNS page, you can add DNS servers to the system.
DNS servers are used to determine the IP address from the name of a server in Intranets or the
Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
On this page, you can specify the addresses of DNS servers manually.
!
When you use the built-in DHCP server, the network parameters (including DNS servers)
are distributed to clients automatically.
If you want to specify the DNS server, enter a DNS server address in the Name servers list. To
specify several addresses, press the Enter key and enter a needed address in the next line. Then
click the Apply button.
To remove a DNS server from the system, remove the relevant line from the Name servers field
and click the Apply button.
Figure 54. The Advanced / DNS page.
Page 76 of 270
Configuring Device (Access Point Mode)