DAP-1360 Wireless N300 Access Point & Router
User Manual
Status
The pages of this section display data on the current state of the
network statistics
•
IP addresses leased by the DHCP server
•
data on devices connected to the
•
Network Statistics
On the Status / Network statistics page, you can view statistics for all connections existing in
the system (LAN, WLAN). For each connection the following data are displayed: name and state
(when the connection is on, its name is highlighted in green, when the connection is off, its name is
highlighted in red), IP address and subnet mask, gateway (if the connection is established), MAC
address, MTU value, and volume of data received and transmitted (with increase of the volume the
units of measurement are changed automatically: byte, Kbyte, Mbyte, Gbyte).
access
point's network and its web-based interface.
Figure 33. The Status / Network statistics page.
Page 45 of 270
Configuring Device (Access Point Mode)
access
point: