D-Link DAP-1360 User Manual page 21

DAP-1360 Wireless N300 Access Point & Router
User Manual
6. Select the Use the following IP address radio button and enter the value
198.168.0.51 in the IP address field. The Subnet mask field will be filled in
automatically. Click the OK button.
Figure 10. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
7. Click the OK button in the connection properties window.
Now you can connect to the web-based interface of DAP-1360 for configuring all needed
parameters. To gain access to an external network (to the Internet), you also need to specify the
default gateway and the addresses of DNS servers.
Page 21 of 270
Installation and Connection