D-Link DAP-1360 User Manual page 187

DAP-1360 Wireless N300 Access Point & Router
User Manual
Figure 150. The page for creating a new connection. The Miscellaneous section.
Parameter
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
When all needed settings are configured, click the Apply button.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the access point to answer ping
requests from the external network through this connection. For
security reasons, it is recommended not to select this checkbox.
Page 187 of 270
Configuring Device (Router Mode)
Description