AudioCodes Mediant 800B User Manual page 1294

Parameter
configure voip > gateway
manipulation
SourceNumberMapIp2Tel
[SourceNumberMapIP2Tel]
configure voip > gateway
manipulation settings > prfm-
ip-to-tel-src-map
[PerformAdditionalIP2TELSour
ceManipulation]
Source Phone Number Manipulation for Tel-to-IP Calls Table
Source Phone Number
Manipulation for Tel-to-IP Calls
configure voip > gateway
manipulation
SourceNumberMapTel2Ip
[SourceNumberMapTel2IP]
Redirect Number IP-to-Tel Table
Redirect Number IP -> Tel
configure voip > gateway
manipulation redirect-number-
map-ip2tel
User's Manual
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_ManipulationName,
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For more information, see 'Configuring Source/Destination Number
Manipulation' on page 555.
Enables additional source number manipulation for IP-to-Tel calls.
The additional manipulation is done on the initially manipulated
source number, and this additional rule is also configured in the
manipulation table (SourceNumberMapIP2Tel parameter). This
enables you to configure only a few manipulation rules for complex
number manipulation requirements (that generally require many
rules).

[0] = Disable (default)

[1] = Enable
This table parameter manipulates the source phone number for Tel-
to-IP calls. The format of the ini file table parameter is as follows:
[SourceNumberMapTel2Ip]
FORMAT SourceNumberMapTel2Ip_Index =
SourceNumberMapTel2Ip_ManipulationName,
SourceNumberMapTel2Ip_DestinationPrefix,
SourceNumberMapTel2Ip_SourcePrefix,
SourceNumberMapTel2Ip_NumberType,
SourceNumberMapTel2Ip_NumberPlan,
SourceNumberMapTel2Ip_RemoveFromLeft,
SourceNumberMapTel2Ip_RemoveFromRight,
SourceNumberMapTel2Ip_LeaveFromRight,
SourceNumberMapTel2Ip_Prefix2Add,
SourceNumberMapTel2Ip_Suffix2Add,
SourceNumberMapTel2Ip_IsPresentationRestricted,
SourceNumberMapTel2Ip_SrcTrunkGroupID;
[\SourceNumberMapTel2Ip]
For more information, see 'Configuring Source/Destination Number
Manipulation' on page 555.
This table parameter manipulates the redirect number for IP-to-Tel
calls.
The format of the ini file table parameter is as follows:
[RedirectNumberMapIp2Tel]
FORMAT RedirectNumberMapIp2Tel_Index =
1294
Mediant 800B Gateway & E-SBC
Description
Document #: LTRT-10632