MAGEE Scientific Aethalometer AE33 User Manual page 51

Aethalometer
Model AE33
Display
FlowCal
TapeSenAdj
LED adjust
Change tape
External device
Update
____________________________________________________________________________________________________________
User's manual – Ver. 1.55
Choose between having the display either constantly ON;
Saver - screen saver mode (in this case after minutes of no
activity the screen would turn black only the status circle
would appear on it), or Auto OFF - the screen turns off after
minutes of no activity.
This button starts the flow calibration procedure, described
in chapter 9.3 Manual flow calibration.
This button starts the tape sensor adjustment procedure,
described in chapter 9.8 Tape Sensor calibration.
This button starts the LED adjustment procedure (only for
experienced users!)
This button starts the procedure to change the used filter tape
roll with a new one.
This button allows connecting different external devices on
COM ports. See chapter 10.1 External devices.
This button allows you to update the software or the
firmware. See chapter 12, Software upgrade.
July 2017 51/146