Table of Contents
Advertisement
Rear side
Following terminals, card slots, and card access lamps are inside each cover.
f <USB3.0 DEVICE> terminal
f <AV OUT> terminal
f <REMOTE> terminal
f <LAN> terminal
f <HDMI> terminal
f <DC IN 12V> terminal
1
2
3
4
5
1 <USB3.0 DEVICE> terminal
Connect to a computer with the USB type C cable to transfer data.
2 Card 1 access lamp
Indicates the access status for recording and playback of the memory card inserted in card slot 1.
Whether or not to illuminate the lamp can be set in the menu.
3 Card slot 1
A slot for the memory card.
4 Card slot 2
A slot for the memory card.
5 Card 2 access lamp
Indicates the access status for recording and playback of the memory card inserted in card slot 2.
Whether or not to illuminate the lamp can be set in the menu.
6 Fan inlet
Fan inlet for cooling fan. Do not block this while the camera is being used.
7 <SDI OUT> terminal
A terminal to output SDI signal by connecting a monitor, etc.
8 <AV OUT> terminal
This is the output terminal for the video and audio of an external monitor.
9 <TC IN/OUT> terminal
Connects to an external equipment and output/input a time code.
Inputs the standard time code when locking the time code with an external equipment.
Input and output are set in the [RECORDING] menu → [TC/UB] → [TC IN/OUT SEL].
10 <REMOTE> terminal
Connects the remote control unit (optional) to control some functions remotely.
11 <LAN> terminal
Connects the LAN cable.
12 Eye sensor
Screen is displayed on the viewfinder when an eye is brought close.
13 Viewfinder
Chapter 2 Description of Parts — Camera
12
13
15
16
17
18
– 23 –
14
19
20
6
7
8
9
10
11
Advertisement
Table of Contents
