Recording Function That Cannot Be Used Simultaneously - Panasonic AG-CX350 Operating Instructions Manual

Recording function that cannot be used simultaneously

Depending on the recording function that is set, there are recording functions that cannot be used simultaneously.
f Meaning of the symbols used in the table are as follows.
- l: Can be used simultaneously.
- —: Cannot be used simultaneously.
Recording function Pre-recording*
to additionally set
Pre-recording* *
1 2
Relay recording
Simultaneous
recording
Interval
recording* * * *
3 4 6 7
Background
recording* * *
1 3 8
VFR/super slow
recording* * *
3 4 5
*1 Time code is fixed to free run.
*2 The pre-recording is canceled once when three hours has passed without starting the recording.
*3 Cannot set simultaneously in the following cases.
f When recording in AVCHD format
*4 Time code is fixed to recording run.
*5 This cannot be set when the frequency of the [SYSTEM] menu → [REC FORMAT] is set to 50.00i/59.94i.
*6 The time code is fixed to [NDF].
*7 The [VIDEO OUT/LCD/VF] menu → [SDI OUT] → [SDI REC REMOTE] and the [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [HDMI REC REMOTE] will
not operate.
*8 This will not operate when anything other than 1080p/1080i is selected in the [SYSTEM] menu → [REC FORMAT].
Chapter 10 Notes — Recording function that cannot be used simultaneously
* Relay recording
1 2
l
l
—
l
— —
— —
— —
Recording function that is set
Simultaneous Interval
recording recording*
—
l
— —
l
l
— —
— —
– 190 –
Background
* * * recording* * *
3 4 6 7 1 3 8
—
—
—
—
—
VFR/super slow
recording* * *
3 4 5
—
—
—
—
—