Ipv6 Prefix Setup - ZyXEL Communications XGS4600 Series User Manual

Table 32 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Router Discovery Setup (continued)
LABEL
Minimum Interval
Maximum Interval
Lifetime
Suppress

8.9.10 IPv6 Prefix Setup

Use this screen to configure the Switch's IPv6 prefix list for each interface. Click the link next to IPv6 Prefix
Setup in the IPv6 Configuration screen to display the screen as shown next.
Figure 85 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup
The following table describes the labels in this screen.
Table 33 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup
LABEL
Interface
Prefix
Prefix Length
Valid Lifetime
Preferred Lifetime
Chapter 8 Basic Setting
DESCRIPTION
This field displays the minimum time interval at which the Switch sends router
advertisements for this interface.
This field displays the maximum time interval at which the Switch sends router
advertisements for this interface.
This field displays how long the router in router advertisements can be used as a default
router for this interface.
This field displays whether the Switch sends router advertisements and responses to router
solicitations on this interface (No) or not (Yes).
DESCRIPTION
Select the IPv6 interface you want to configure.
Set the IPv6 prefix that the Switch includes in router advertisements for this interface.
Set the prefix length that the Switch includes in router advertisements for this interface.
Specify how long (from 0 to 4294967295 seconds) the prefix is valid for on-link
determination.
Specify how long (from 0 to 4294967295 seconds) that addresses generated from the prefix
remain preferred.
The preferred lifetime cannot exceed the valid lifetime.
XGS4600 Series User's Guide
110