Change Your Password - ZyXEL Communications XGS4600 Series User Manual

Table 9 Navigation Panel Links (continued)
LINK
DHCP
VRRP
Router Setup
ARP Setup
Management
Maintenance
Access Control
Diagnostic
System Log
Syslog Setup
Cluster
Management
MAC Table
IP Table
ARP Table
Routing Table
Path MTU Table
Configure Clone
IPv6 Neighbor
Table
Port Status
Service Register

4.4.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator password.
Click Management > Access Control > Logins to display the next screen.
Chapter 4 Web Configurator
DESCRIPTION
This link takes you to screens where you can configure the DHCP settings.
This link takes you to screens where you can configure redundant virtual router for your
network.
This link takes you to a screen where you can enable Equal-Cost MultiPath (ECMP) routing
and set the criteria the Switch uses to determine the routing path for a packet.
This link takes you to a screen where you can configure ARP learning mode on a per-port
basis and create static ARP entries which do not age out.
This link takes you to screens where you can perform firmware and configuration file
maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password and configure
SNMP and remote management.
This link takes you to screens where you can ping IP addresses, run traceroute, test ports.
This link takes you to a screen where you can view system logs.
This link takes you to a screen where you can setup system logs and a system log server.
This link takes you to a screen where you can configure clustering management and view its
status.
This link takes you to a screen where you can view the MAC address and VLAN ID of a device
attach to a port. You can also view what kind of MAC address it is.
This link takes you to a screen where you can view the IP addresses and VLAN ID of a device
attached to a port.You can also view what kind of device it is.
This link takes you to a screen where you can view the MAC address – IP address resolution
table.
This link takes you to a screen where you can view the routing table.
This link takes you to a screen where you can view the IPv6 path MTU table.
This link takes you to a screen where you can copy attributes of one port to other ports.
This link takes you to a screen where you can view the Switch's IPv6 neighbor table.
This link takes you to a screen where you can view the port statistics.
This link takes you to a screen where you can view the status of your service registrations and
upgrade licenses.
XGS4600 Series User's Guide
57