®
IONPURE
OPERATING MANUAL REVISION HISTORY
EVENT
DATE
Original publication
August 2009
1. INTRODUCTION
This section contains the following instructions:
•
VNX50HH-2 model module overview - Brief introduction to components and models
•
Using this Manual - How to use this Manual
•
Precautions - Precautions to prevent personal injury or equipment damage during installation
1.1. VNX50HH-2 model module Overview
VNX50HH-2 modules are designed to be installed in either single or multiple Continuous Deionization
VNX systems. Their compact state-of-the-art design assures ease of installation, maintenance, and
service. Compared to the VNX50-2 the VNX5HH-2 module was designed for higher feed water
hardness tolerance. They are differentiated by a green 'HH" marking on the vessel of the VNX50HH-
2 module. VNX50HH-2 modules are available in the following size:
Part Number
IP-VNX50HH-2
For more information on the VNX module specifications and flow rates, see Sections 2.2, 5.2 and/or
Appendix A of this Manual.
Figure 1-1: Angle and Side views of VNX50HH-2 Modules
Page 5
VNX50HH-2 CEDI Modules
DESCRIPTION
Operation & Maintenance Manual
Nominal Flow
3
40 gpm (9.1 m
/h)
Description
Single VNX module, VNX type
IP-MAN-VNX50HH2