FUEL RECEIVER
The fuel receiver (3, Figure 5-2) is mounted on the fuel
tank (2). Keep the cap on the receiver to prevent dirt
build-up during truck operation. If fuel spills from
breather valve or tank does not fill completely, check
breather to see that the balls are in place and the filter
is clean.
M5-2
FIGURE 5-2. FUEL TANK BREATHER AND
1. Breather Valve
2. Fuel Tank
NOTE:
This Illustration Represents a Typical Installation.
Fuel tank may vary in size, shape and location
depending on truck model.
Buckeye Quick Fill Fuel System
RECEIVER INSTALLATION
3. Fuel Receiver
4. Fuel Level Gauge
91493
M05003 5/90