Komatsu 830E Shop Manual page 185

18. Use the DOWN arrow key and move the cursor to
the next file name.
19. Move the cursor to the right to position the cursor
on the name.
20. Type in the new file name and press [ENTER].
Note an asterisk (*) appears in front of both filena-
mes, indicating the names have been changed
but the files have not yet been created.
21. You can now press [F5] to create all new files at
once.
a. Note the screen prompts you to make a deci-
sion; "(O)" for Overwrite the file name, "(S)" for
Skip creation of the noted file & continue with
the remaining files, "(A)" for Abort creation of
any new files. This is because the [F5] key
tries to create all of the new files, and the first
file has already been created. The computer is
looking at the first file and is asking which of
these three options to apply. Since the first file
has already been created, the correct option is
"(S)" for Skip & continue.
NOTE: This feature can be used to change a file name
which was already created by selecting "(O)", or abort
the last changes made by selecting "(A)".
E02016 2/02
22. Press [S]. Note the computer went directly to the
second file and created it, and went on to the third
file and created it. Note also that all asterisks (*)
are now changed to plus signs (+).
23. Press [F9] or [ESC] to exit this screen and return
to the GE OHV STATEX III MENU.
24. Select "TRUCK SETUP (CFG)" and press
[ENTER].
25. Select No. [1] to view the current truck configura-
tions on file. Note that the new configuration files
are listed and are available for use. These new
files contain the latest release of GE software and
all of the truck configuration data from the previ-
ous files.
Electrical Propulsion Components E2-29