The Main Menu - Komatsu 830E Shop Manual

THE MAIN MENU

The main menu, titled GE OHV STATEX III Enhanced
MENU (or GE OHV STATEX III MENU if version 14 is
installed) as shown in Figure 2-2, illustrates the major
selections available. Note the software release date
also appears in the title. This menu is used to access
all other operating menus. Options on this menu are
selected by using the arrow keys or typing the first let-
ter of the name of the selection.
To view the main menu, turn the PTU power switch on.
After the PTU performs a self-test startup procedure,
the DOS "C:>" prompt will appear.
Type "gemenu3e" ["gemenu", if using vers. 14] and
press the [ENTER] key. The main menu will appear on
the PTU screen.
The following identifies each of the options listed on the
main menu:
"QUIT MENU"
When selected, the PTU exits the GE software and
returns to the DOS "C:>" prompt. When the "C:>"
prompt appears, the PTU is functioning as a stan-
dard laptop computer.
"PTU TALK TO TRUCK"
Used to "talk" to the CPU (Central Processing Unit)
in the FL275 panel. All PTU/CPU communication is
done through this selection. To enter this selection,
a log-on with an appropriate password is required
and the serial communication cable should be
attached.
Software Release Date:
APR01 = Statex III Enhanced Ver. 1
APR00 = Statex III, Ver. 14
E2-24
"VIEW PTU SAVED FILES"
Used to examine the contents of saved event files
in the PTU. No password is required. Can only be
used to playback events already stored in a file-
name.
"LIST STAT DATA FILES"
Used to examine the statistical data from a truck's
CPU which has been stored on the PTU.
"TRUCK SETUP (CFG)"
Used to edit or create CFG files. Refer to PRO-
GRAM TRUCK, for a procedure for downloading
configuration files to the CPU in the FL275 panel.
"SELECT TRUCK SETUP"
Used to view the current list of configuration files
and to select a configuration file for downloading to
the CPU. Refer to PROGRAMMING TRUCK for
additional information.
"UPDATE CFG VERSION"
Permits conversion of truck configurations from
older versions of software to be compatible with
newer versions without requiring retyping values
for overspeed, serial numbers etc.
"CHANGE PTU PASSWORD"
Used to set passwords which permit different lev-
els of access to the operating screens in the soft-
ware.
FIGURE 2-2. MAIN MENU
Electrical Propulsion Components 2/02 E02016