Power Train; Alternator Removal Procedure - Komatsu 830E Shop Manual

Hide thumbs Also See for 830E:

Table of Contents

Removal (Komatsu SSDA16V160 or SDA16V160

The following instructions cover the removal of the

main alternator from the engine after the power

module has been removed from the truck. (Refer to

Figure 4-2.)

When lifting alternator, attach hoist to lift eyes

only. The alternator weighs approximately 7,700

lbs. (3493 kg). Use a lifting device that can han-

dle the load safely.

1. Attach hoist with two lifting chains to the alter-

nator lifting eyes (7, Figure 4-2).

2. Block under rear of engine

a. Loosen cradle adjustments setscrews (3,

Figure 4-1).

b. Loosen engine/cradle capscrews (3, Figure

1. Capscrews and Lockwashers

2. Cradle Structure

3. Capscrews

POWER TRAIN

FIGURE 4-2. ENGINE AND ALTERNATOR

4. Flywheel Housing

FIGURE 4-1. CRADLE STRUCTURE

1. Cradle Structure

3. Adjustment Setscrew

7. Alternator Lift Eyes

8. Alternator/Blower

Table of Contents