Komatsu 830E Shop Manual page 698

INSTRUMENT PANEL AND INDICATOR LIGHTS
CONTROL SYMBOLS
Many control functions are identified with "International" symbols that the operator should learn to recognize imme-
diately. The operator must understand the function and operation of each instrument and control. This knowledge
is essential for proper and safe operation of the machine.
The following symbols are general indicators and may appear in multiple locations and combinations on the instru-
ment panel.
This symbol may be used
alone or with another symbol.
This symbol identifies the "Off"
position of a switch or control.
This symbol may be used
alone or with another symbol.
This symbol identifies the "On"
position of a switch or control.
This symbol identifies the
"Pushed-In" position of a
push-pull switch or control.
This symbol identifies the
"Pulled-Out" position of a
push-pull switch or control.
N5-10 Operator Controls
This symbol when it appears
on an indicator or control iden-
tifies that this indicator or con-
trol is NOT used.
This symbol identifies a rotary
control or switch. Rotate the
knob clockwise or counter-
clockwise for functions.
This symbol identifies a switch
used to test or check a func-
tion. Press the switch on the
side near the symbol to per-
form the test.
N05056