Table of Contents
Advertisement
A5, D5, E5, A6, B6, C6, D6,
E6: Blank
(Reserved for future use)
(7) Hazard Warning Lights
The
hazard
warning
switch flashes all the turn sig-
nal lights. Pressing the bottom
side
of
the
rocker
switch
(toward the triangle) activates
these lights. Pressing the top
side
of
the
rocker
switch
(toward the "OFF" symbol)
turns these lights off.
N05056
light
Operator Controls
(8) Lamp Test Switch
The Lamp Test switch is pro-
vided to allow the operator to
test the indicator lamps prior to
starting the engine. Any lamp
bulbs which do not illuminate
should be replaced before
operating the truck.
Lamp Test:
To test the lamps and the warning horn:
1. Turn the key switch to the RUN position.
2. Press the bottom of the rocker switch for the
"check" position:
3. All lamps should illuminate unless they relate to
optional equipment not installed on the truck.
4. The warning horn should sound.
5. Releasing the spring-loaded switch will allow the
switch to return to the "Off" position.
If any lamp does not illuminate, the bulb should be
replaced before operating the truck.
N5-21
Advertisement
Chapters
Table of Contents
Troubleshooting
